780528
41
Zoom out
Zoom in
Previous page
1/42
Next page
KONA OWNER’S MANUAL
40
• A difference in sound when tapping the surface. If you
gently tap the surface of an undamaged composite you
will hear a consistent sound, usually a hard, sharp sound.
If you then tap a delaminated area, you will hear a differ-
ent sound, usually duller, less sharp.
Unusual Noises: Either a crack or delamination can
cause creaking noises while riding. Think about such
a noise as a serious warning signal. A well maintained
bicycle will be very quiet and free of creaks and squeaks.
Investigate and nd the source of any noise. It may not
be a crack or delamination, but whatever is causing the
noise must be xed before riding.
WARNING: Do not ride a bicycle or component with
any delamination or crack. Riding a delaminated or
cracked frame, fork or other component could lead to
complete failure, with risk of serious injury or death.
C) UNDERSTANDING COMPONENTS
It is often necessary to remove and disassemble compo-
nents in order to properly and carefully inspect them. This
is a job for a professional bicycle mechanic with the special
tools, skills and experience to inspect and service today’s
high-tech high-performance bicycles and their components
.
Aftermarket “Super Light” components
Think carefully about your rider prole as outlined above.
The more you t the “shorten product life” prole, the
more you must question the use of super light compo-
nents. The more you t the “lengthen product life” pro-
le, the more likely it is that lighter components may be
suitable for you. Discuss your needs and your prole very
honestly with your dealer. Take these choices seriously
and understand that you are responsible for the changes.
A useful slogan to discuss with your dealer if you contemplate
changing components is “Strong, Light, Cheap pick two.
Original Equipment components
Bicycle and component manufacturers tests the fatigue
life of the components that are original equipment on
your bike. This means that they have met test criteria and
have reasonable fatigue life. It does not mean that the
original components will last forever. They won’t.
Appendix C
Coaster Brake
1. How the coaster brake works
The coaster brake is a sealed mechanism which is a part
of the bicycles rear wheel hub. The brake is activated by
reversing the rotation of the pedal cranks (see g. 5). Start
with the pedal cranks in a nearly horizontal position, with
the front pedal in about the 4 o’clock position, and apply
downward foot pressure on the pedal that is to the rear.
About 1/8 turn rotation will activate the brake. The more down-
ward pressure you apply, the more braking force, up to the
point where the rear wheel stops rotating and begins to skid.
WARNING: Before riding, make sure that the brake is
working properly. If it is not working properly, have the
bicycle checked by your dealer before you ride it.
WARNING: If your bike has only a coaster brake, ride
conservatively. A single rear brake does not have the
stopping power of front-and-rear brake systems.
2. Adjusting your coaster brake
Coaster brake service and adjustment
requires special tools and special
knowledge. Do not attempt to
disassemble or service your coaster
brake. Take the bicycle to your
dealer for coaster brake service.
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kona 2013 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kona 2013 in the language / languages: English as an attachment in your email.

The manual is 3.93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info