625968
135
Zoom out
Zoom in
Previous page
1/226
Next page
TRANSPORTING THE MACHINE
133
During the loading and unloading operations, always use ramps or a platform and proceed as indicated below.
LOADING THE MACHINE
NOTE
q Load and unload the machine on/from the trailer on firm and
level ground only, and widen the track gauge.
Keep a safety distance from the edge of the road.
1. Engage the trailer brakes and place safety blocks under the
trailer wheels to prevent it from moving. The distance
between the ramps and their alignment must be adapted to
the wheelbase of the trailer and the track gauge. Make sure
that the two sides are at the same distance.
The inclination of the ramps must not exceed 15°.
2. Run the engine at low speed.
(A): Idling
Machine with speed increase function
3. Make sure that the travel speed increase warning light is off.
NOTE
q If the warning light is on, press the speed selection switch to the
low speed position (B).
Ramp
Distance
between
ramps
Max15
Block
Blocks
RYA00670
RKA16490
135


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Komatsu Galeo PC14R-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Komatsu Galeo PC14R-2 in the language / languages: English as an attachment in your email.

The manual is 6,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info