625968
137
Zoom out
Zoom in
Previous page
1/226
Next page
TRANSPORTING THE MACHINE
135
SECURING THE MACHINE ON THE MEANS OF TRANSPORT
After positioning the machine on the trailer, it is necessary to secure it by proceeding as indicated below.
IMPORTANT
q To avoid damaging the machine during transport, place
wooden blocks under the end of the bucket cylinder, in
such a way as to prevent it from touching the ground.
1. Lower the blade.
2. Extend the bucket cylinder and the arm cylinder completely,
and lower the boom slowly.
3. Stop the engine and remove the ignition key.
4. Shift the safety lever to the “locked” position (L).
5. Lock the covers.
See paragraph "3.2.4 COVERSWITH LOCK".
IMPORTANT
q Do not use the hole in the back of the undercarriage to tow
or lift the machine.
6. Place blocks under both ends of the tracks to prevent the
machine from moving during transport and secure the
machine with sufficiently strong chains or metal cables.
Pay special attention when securing the machine, to prevent
it from sliding laterally.
When securing the machine with a chain or metal cable, use
the hole in the rear part of the undercarriage and the hole in
the blade side plate.
RKA16440
137


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Komatsu Galeo PC14R-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Komatsu Galeo PC14R-2 in the language / languages: English as an attachment in your email.

The manual is 6,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info