Manual Koenic KMG 4151 B (page 17 of 99) (English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish)

782880

Zoom out

Zoom in

1/99

English

Fig. 13 Insert the adapter ring into the meat

mincer attachment on the auger, so

that the nose on the meat grinder

attachment is located in the groove

on the adapter ring and so that the

rounded side faces the union nut.

Now insert the disc of the biscuit

attachment without the pattern plate

into the union nut and screw the union

nut onto the meat grinder attachment.

Now insert the pattern plate back in

the disc and set the desired biscuit

shape.

Fig. 14 Connect the power plug to the mains.

Switch on the device with the ON/

OFF switch. Put the biscuit dough into

the ﬁlling opening and bowl. Use the

pusher to slowly and steadily push

down the dough and make your biscuits

as desired. When you have ﬁnished

your work, switch o the appliance by

pressing the ON/OFF switch again

and unplug the appliance. Clean the

device immediately as given in chapter

Cleaning and care.

Cleaning and care

Warning

• Before cleaning, always switch o the

product and disconnect the plug from the

power supply.

• Make sure that no moisture is entering

the product during cleaning.

• Never immerse the motor enclosure in

water or other liquids.

Fig. 15 Disconnect the power plug.

Fig. 16 Remove the bowl and the union nut.

Remove all special attachments and

inserts as well as the conveyor screw.

Fig. 17 Press and hold the grinder attachment

release button, turn the grinder

attachment to the right until it releases

and remove it.

• Clean all removable parts and the

mincer attachment in warm, soapy

water. Rinse the parts with clean

water and let them dry completely.

• Clean the motor housing with a

slightly damp cloth.

• Never use corrosive detergents, wire

brushes, abrasive scourers, metal

or sharp implements to clean your

product.

• Dry the product thoroughly after

cleaning.

• Store the product in a cool, dry

location, away from children and

pets.

• Store the corresponding parts in

the correct order and position in the

pusher. Store two of the grinding

discs in the grinding disc magazine

and the biscuit attachment

separately. Install the remaining

parts, conveyor screw, blade, one

grinding disc and the union nut back

to the mincer attachment. Store the

assembled meat grinder attachment

installed to the device or separately.

Observe the chapter Assembling

and use for assembling.

Attention

The components P, Q and D may not be

cleaned in a dishwaser. Only clean them by

hand, as they will tarnish when cleaned in a

dishwasher.

KMG4151B-Meat Grinder_190809_V06_HR.indb 17 12/8/2019 10:09

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Koenic KMG 4151 B in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish as an attachment in your email.

The manual is 5.64 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Koenic KMG 4151 B Manual

Product: