782880

Koenic KMG 4151 B Manual

16
Zoom out
Zoom in
Previous page
1/99
Next page
16
English
Size - A5
Fig. 7Remove the lid from the pusher and
take out the adapter ring and sausage
muzzle.
Insert the adapter ring into the grinder
attachment on the conveyor screw
so that the nose on the meat grinder
attachment sits in the groove on the
adapter ring and so that the rounded
side faces the sausage muzzle. Now
insert the sausage muzzle into the
union nut and screw the union nut onto
the meat grinder attachment.
Fig. 8Connect the power plug to the mains.
Slide the desired length of synthetic
or intestine sausage casing over
the sausage muzzle. Make a knot at
the beginning of the sausage cover.
Switch on the device with the ON/
OFF switch. Put the sausage meat in
the filling opening and bowl. Use the
pusher to slowly and steadily push
down the meat and make the sausages
as desired. When you have finished
your work, switch o the appliance by
pressing the ON/OFF switch again
and unplug the appliance. Clean the
device immediately as given in chapter
Cleaning and care.
Kibbeh production (G+H)
Attention
In this application, the knife and perforated
disc must be removed.
Fig. 9Remove the union nut and remove the
grinding disc and blade.
Attention
The blade is very sharp. Be careful when
handling the blade.
Fig. 10 Remove the lid from the pusher and
take out the kibbeh cone and kibbeh
nozzle.
Insert the kibbeh cone into the meat
mincer attachment on the auger so
that the nose on the meat grinder
attachment sits in the groove on the
kibbeh cone and so that the rounded
side faces the union nut. Now insert
the kibbeh nozzle into the union nut
and screw the union nut onto the meat
grinder attachment.
Fig. 11 Connect the power plug to the mains.
Switch on the device with the ON/OFF
switch. Put the raw kibbeh in the filling
opening and bowl. Use the pusher to
slowly and steadily push down the
dough and make your kibbeh as desired.
When you have finished your work,
switch o the appliance by pressing the
ON/OFF switch again and unplug the
appliance. Clean the device immediately
as given in chapter Cleaning and care.
Spritz biscuits production (I+L)
Attention
In this application, the knife and perforated
disc must be removed.
Fig. 12 Remove the union nut and remove the
grinding disc and blade.
Attention
The blade is very sharp. Be careful when
handling the blade.
KMG4151B-Meat Grinder_190809_V06_HR.indb 16 12/8/2019 10:09
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Koenic KMG 4151 B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Koenic KMG 4151 B in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish as an attachment in your email.

The manual is 5.64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info