782880

Koenic KMG 4151 B Manual

15
Zoom out
Zoom in
Previous page
1/99
Next page
15
English
Fig. 5Place a suitable container in front of
the meat grinder attachment. Switch
on the device with the ON/OFF switch.
Feed meat, vegetables or other suitable
foods that are suciently small into
the feeding chute of the mincer. Use
the pusher as intended. If all food has
been ejected from the grinding disc,
switch o the appliance by pressing
the ON/OFF switch again. If the device
locks up or runs hard, switch it o, let
it come to a standstill and then press
the reverse button REV. If the conveyor
screw is free again, continue with your
work.
When you have finished your work,
switch o the device and disconnect
the power plug. Clean the device
immediately as given in chapter
Cleaning and care.
Sausage production (I+K)
Attention
In this application, the blade and grinding disc
must be removed.
Fig. 6Remove the union nut and remove the
grinding disc and blade.
Attention
The blade is very sharp. Be careful when
handling the blade.
Assembling and use
For all applications:
Fig. 1Insert the meat grinder attachment
into the connection on the motor
housing by about 30 °. Turn the meat
mincer attachment to the left as far
as it will go until the release button
clicks into place and the filling opening
of the meat grinder attachment is
approximately vertical.
Put the bowl on the meat grinder
attachment.
Meat grinder (O + A/B/N)
The mid size grinding disc (5 mm) is already pre-
assembled in the meat grinder attachment.
To use other grinding discs, remove them
from the magazine on the back of the motor
housing.
Fig. 2Remove the union nut and remove the
unwanted grinding disc.
Fig. 3Ensure the correct sequence and
position of all parts and place the
desired grinding disc on the screw end.
Make sure the nose on the meat grinder
attachment is in the groove of the
grinding disc.
Screw the union nut back onto the
mincer attachment.
Fig. 4Connect the power plug to the mains.
KMG4151B-Meat Grinder_190809_V06_HR.indb 15 12/8/2019 10:09
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Koenic KMG 4151 B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Koenic KMG 4151 B in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish as an attachment in your email.

The manual is 5.64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info