784310
138
Zoom out
Zoom in
Previous page
1/150
Next page
64
Fitting and Installation
7.5 Converting the appliance to a different type of gas
 Warning!Dangerofexplosion!
If the conversion to another type of gas is not carried
out properly, gas may escape.
The changeover to another type of gas may only be
carried out by a certied gas specialist.
For this purpose, the gas and electricity supply must be
disconnected.
The following instructions are accordingly
addressed to the installer.
 Notes:
The appliance can be operated with natural gas (NG)
or liquefied petroleum gas (LPG).
The corresponding injector nozzles are supplied for
both types of gas.
From the factory, the appliance is set up for operation
with natural gas.
The rating plate on the underside of the appliance
contains data corresponding to both natural gas and
LPG operation.
Changing the injector nozzles
If the available gas type does not match the current adjust-
ment of the appliance, change the injector nozzles accordingly
(included in the delivery), as follows:
Remove the pot holders, burner caps and crowns from the
hob.
Unscrew the injector nozzles with a 7mm socket spanner
and remove them.
Replace the injector nozzles with the required ones supplied,
according to the gas available and the respective burner
(see following table), screwing them on in the same way.
138


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for KKT Kolbe GK7021G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of KKT Kolbe GK7021G in the language / languages: English, German as an attachment in your email.

The manual is 4.48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info