784310
136
Zoom out
Zoom in
Previous page
1/150
Next page
62
Fitting and Installation
Connecting the hob to the gas supply
If necessary, use a clamp to tighten and seal the connection
of the open end of the gas hose to the connector.
Connect the supply line to the elbow (4) pre-mounted on the
gas inlet pipe (1) as shown in the illustration, fitting the con-
nection with a gasket.
1Hob connection pipe
2Nut
3Gasket
4Elbow,
1/2'' thread male gas
5Gasket
6Nut
7Gas supply line
1
2
3
4
5
6
7
 Connection sequence for conical connections:
Cylindrical male adapter
Seal, female gas adapter
conical-cylindrical or cylindrical components
Make the connection in such a way that no pressure is exerted
on the connection nuts and piping or the appliance is exposed
to any other pressure.
Make sure that the pipe cannot become blocked, kinked or
crushed or come into contact with sharp edges or hot areas,
both during and after installation (e.g. due to moving parts).
136


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for KKT Kolbe GK7021G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of KKT Kolbe GK7021G in the language / languages: English, German as an attachment in your email.

The manual is 4.48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info