784310
140
Zoom out
Zoom in
Previous page
1/150
Next page
66
Fitting and Installation
7.6 Adjusting the minimum level setting
The gas flow or flame intensity when the control dial is set
to the minimum level is set at the factory according to the
pre-mounted injector nozzles.
After replacing the injector nozzles or in case of special pres-
sure conditions, it is necessary to have them adjusted
by a suitably qualified specialist.
This can be done regardless of the positioning or fixing of the
hob, as follows:
Ignite the burner whose minimum level setting
you want to adjust.
Turn the corresponding control knob to the
minimum position.
Remove the knob of the rotary control including the bearing
rubber and, using a screwdriver of suitable size, turn the
regulating screw (see illustration) to the appropriate posi-
tion corresponding to the type of gas used, as follows:
Adjustment of the minimum level for natural gas operation
Turn the regulating screw clockwise or counterclockwise
until a small, even flame is produced.
Adjustment of the minimum level for LPG operation
Fully tighten the adjusting screw (clockwise).
Refit the knob including the bearing rubber.
Make sure that the regulation now set is sufficient ...
that the flame does not go out when you quickly turn the
control from the maximum to the minimum position.
to maintain the heating of the thermocouple so that the
flame is not extinguished.
If this is not the case, correct the setting accordingly.
 Note:
The burners do not require regulation of the primary air.
140


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for KKT Kolbe GK7021G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of KKT Kolbe GK7021G in the language / languages: English, German as an attachment in your email.

The manual is 4.48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info