784260
55
Zoom out
Zoom in
Previous page
1/60
Next page
55
EN
Cleaning and maintenance
Slide-in rails
For thorough cleaning of the rails and the cavity, you can
remove the side racks as follows / shown in the ugure.
Take off the white ceramic / plastic elements. (1.1).
Lift the side rack. (1.2).
Now you can take out the side rack. (1.3).
To replace the side racks after cleaning, proceed in rever-
se order.
Note: Take particular care to reattach the ceramic / plastic
elements as well. These are absolutely necessary for safe
microwave operation. Otherwise damage may occur that is
not covered by the warranty.
1.1
1.2 1.3
Appliance door
For cleaning purposes, the appliance door can be de-
tached.
The appliance door hinges each have a locking lever.
When the locking levers are closed, the appliance door is
secured in place. It cannot be detached.
When the locking levers are open in order to detach the
appliance door, the hinges are locked. They cannot snap
shut.
Caution! Risk of injury!
If the hinges are not locked, they can snap shut
with great force. Ensure that the locking levers
are always fully closed or, when detaching the
appliance door, fully open.
The hinges on the appliance door move when
opening and closing the door, and you may
be trapped. Keep your hands away from the
hinges.
Attention! Risk of damage!
Failure to comply with the following instructions
may result in damage to the appliance that is not
covered by the warranty:
Do not put any weight on the appliance door,
do not hang anything on it and do not place
anything on it.
Always close the appliance door slowly and
in a controlled manner and t it carefully after
unhooking it.
Removing the appliance door
Open the appliance door fully.
Open the two locking levers left and right fully (2.1).
Close the appliance door as far as it will go.
With both hands, grip the door on the left- and right-
hand side and lift it until the door is completely
released from its anchorage.
!Fitting the appliance door
Reattach the appliance door in the opposite sequence
to removal.
When tting the appliance door, make sure that both
hinges are inserted exactly into the corresponding
mounting holes and that they can be pushed in without
resistance. If you feel resistance, check the position of
the hinges.
Open the appliance door completely. When opening the
appliance door, you can check again that the hinges are
in the correct position. If you carry out the assembly
incorrectly, you will not be able to open the appliance
door completely afterwards.
Close both locking levers again (2.2).
Close the appliance door. By the same time , we warmly
recommend you to check one more time , if the door
is onto the right position and if the ventilation slots are
not half-sealed .
2.1
2.2
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for KKT Kolbe EBM8018S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of KKT Kolbe EBM8018S in the language / languages: English, German as an attachment in your email.

The manual is 1.22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info