640448
9
Zoom out
Zoom in
Previous page
1/18
Next page
16 17
b. Parameter setting for photo shooting
1. Image resolution
8.0 MP 3200 x 2400p 4:3
5.0 MP 2592 x 1944p 4:3
3.0 MP 2048 x 1536p 4:3
2. Capture mode
Single shot: The shooting mode is automatically set to single shot each time the camera is turned on.
Pressing the “Shutter” once will take one photo
Triple shot: Pressing the “Shutter” once will take three consecutive photos
Time-lapse mode: Takes one photo every 2s/3s/5s/10s/20s/30s until they key is pressed to stop, the card
is full or the power has run out
Self-timer mode: Select the self-timer delay time (0s, 5s or 10s), then press the “M” key to return to the
“Preview” state. Press the “Shutter” key once to start the timer. The self-timer indicator will
flash at the end of the delay time and take one photo. The system will then automatically
recover the shooting mode to single shooting. If the “Self-timer Delay Time” has been set,
but the unit is restarted without pressing the “Shutter” key, the machine will auto set the
“Self-timer Delay Time” to 0 seconds
Note: Single shot, Triple Shot, Time-lapse mode and Self-timer modes cannot be activated at the same time
c. System parameter setting
1. Beep: Turning the key tones on or off
Note: The camera will still beep when you start and stop a video recording. This cannot be turned off
2. Green indicator light: Please turn it on or off before self timing; the default setting is “ON
3. Time display: Please set before using. The camera will auto record the shooting date and time of an image and
display it in the bottom right corner of the file
4. Loop coverage: When “ON”, the video/audio file will be automatically saved in a segment once every 15 minutes.
If it is not set, the video/audio file will be automatically saved in a segment once every 30 minutes.
Note: The video length is actually determined by the file size, not the length of time. For example: When Loop
coverage is on for 15 minutes, if filming in a dark environment the video may record for a little longer than 15
minutes
5. Auto standby: Select the auto standby time to OFF, 2 minutes, 5 minutes or 10 minutes. Once selected, if there is
no operation, the timer will start and the camera will turn off input and output to enter standby mode at the end
of the time set. If there is any operation during countdown, the system will re-time. If the video recording or
shutter is operated in the standby process, the camera will wake up. The default standby time is set to OFF
6. TV output format: NTSC or PAL. The video format outputted to TV can be selected. If the selected format is
changed, the camera will restart to update the parameters
7. Format: Once youve confirmed that recorded files do not need to be saved, all files can be removed by formatting
Note: lf there is no card inserted, the memory of the camera will be formatted. When a card is inserted, the card
will be formatted rather than the camera’s memory
[continued...]
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kitvision Edge HD10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kitvision Edge HD10 in the language / languages: English as an attachment in your email.

The manual is 2,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kitvision Edge HD10

Kitvision Edge HD10 User Manual - German - 18 pages

Kitvision Edge HD10 User Manual - Dutch - 18 pages

Kitvision Edge HD10 User Manual - French - 18 pages

Kitvision Edge HD10 User Manual - Spanish - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info