640448
7
Zoom out
Zoom in
Previous page
1/18
Next page
12 13
[...continued] Before use
The following indicators can be seen on the TFT display screen:
Work mode:
The
icon shown in the top left corner of TFT display screen indicates that the camera is in video recording
standby state
Battery power:
The
icon shown in the bottom left corner of the TFT display screen indicates how much battery power is left
Resolution of video recording:
In the bottom left corner of the TFT display screen, 1080P/960P/720P/WVGA will show to indicate the video
recording resolution in standby mode
Spare storage capacity:
In the bottom right corner of the TFT display screen,
will indicate whether an external card is available and will
indicate spare storage capacity
In preview state, the camera will not respond to operations of “<” and “>”
The camera can be charged with the included cable. The red indicator on the top of the unit will flash slowly during
charging and will remain red once fully charged
Note: Before use, please check that there is enough battery power. If not, please charge the camera using the included
USB cable. The red indicator will flash slowly during charging and will remain red with the battery icon
displayed
on the TFT display screen after charging
2. Formatting the micro SD card
Please use a high-speed micro SD card only and format it on the camera before recording or taking a picture.
If the micro SD card has been used on other devices, please format it on the camera before any operation.
Note: Please confirm whether the files on the micro SD card are needed before operating. Locked files on the camera
can be formatted to remove. Formatting will wipe all data on the micro SD card
3. Setting the date and time
A yellow number indicates the current cursor position. By pressing the “<” or “>” key, you can move the cursor to the
setup interface
and select the date or time. Press the “OK” key to confirm, which will turn this number red and the
value of the date or time can be changed. Then press the “0K” key again to finish. Finally, move the cursor to using
the “<” or “>” key and press the “OK” key to confirm.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kitvision Edge HD10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kitvision Edge HD10 in the language / languages: English as an attachment in your email.

The manual is 2,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kitvision Edge HD10

Kitvision Edge HD10 User Manual - German - 18 pages

Kitvision Edge HD10 User Manual - Dutch - 18 pages

Kitvision Edge HD10 User Manual - French - 18 pages

Kitvision Edge HD10 User Manual - Spanish - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info