640448
11
Zoom out
Zoom in
Previous page
1/18
Next page
20 21
[...continued] Using the camera
4. Photo shooting
You can set the image resolution before taking photos. Press the “M” key to enter the setup interface, press the
“>” or “<” keys to move the cursor to
, select the menu “Image Resolution” and press the “OK” key to enter the
resolution setup menu. There are three resolution modes available for your selection:
3M: Photo shooting resolution of 2048 x 1536
5M: Photo shooting resolution of 2592 x 1944
8M: Photo shooting resolution of 3200 x 2400
Single shot: In preview mode, press the “Shutter” once to shoot a photo. You will hear a “Click”, the front
green indicator will flash once (the photo shooting icon on the LCD segment screen will also
flash once) and the system will return to the preview state
Triple Shot: Press the “M” key to enter the camera setup interface. Press the “>”or “<” keys to move the
cursor to
, press the “>” or “<” keys to select the menu “Tripple” and press the “OK” key to
confirm. Press the “M” key to exit the setup interface after setting. When the “Shutter” is
pressed once, the camera will then take three consecutive photos
Time-lapse mode: Press the “M” key to enter the camera setup interface, press the
, key to move the cursor to
, then press the “>” or “<” keys to select the menu “Continuous Shooting” and press the “OK
key to set the continuous shooting interval time at 2s, 3s, 5s, 10s, 20s or 30s. Press the “M
key to exit the setup interface after setting the interval time. When the “Shutter” button is
pressed, the camera will start shooting one photo every 2s, 3s, 5s, 10s, 20s, or 30s until the
button is pressed again to stop
Self-timer mode: Press the “M” key to enter the camera setup interface, press the “>” or “<” keys to move the
cursor to
, then press the “>” or “<” keys to select the menu “Self shot” and press the “OK
key to set the delay time at 0s, 5s or 10s. Press the “M” key to exit the setup interface after
setting the delay time. When the “Shutter” is pressed once, the camera will then start the
timer and shoot a photo at the end of the delay time
Note: If the memory space becomes full, the system will display the message “Out of Memory” on the TFT display
screen and return to the preview mode
5. Voice recording
Press the “M” key to enter the camera setup interface, select the menu “Capture Mode”, press the “OK” key to
enter the selection interface, press the “>” or “<” keys to select
, press the “OK” key to confirm your selection,
and finally press the “M” key to exit the setup interface. Press the “Record” key to start recording and the green
indicator will flash slowly, the TFT screen will display the voice recording icon and the timer will start.
After sound recording, press the “M” button to return to the system setting interface. Select the “Capture Mode”
menu and press “OK” to enter the selection interface. Press the “>” or “<” keys to select
, exit the voice mode
then press the “M” key to return to the preview interface.
Note: When the camera is restarted or it wakes up, it will recover to video recording mode
[continued...]
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kitvision Edge HD10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kitvision Edge HD10 in the language / languages: English as an attachment in your email.

The manual is 2,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kitvision Edge HD10

Kitvision Edge HD10 User Manual - German - 18 pages

Kitvision Edge HD10 User Manual - Dutch - 18 pages

Kitvision Edge HD10 User Manual - French - 18 pages

Kitvision Edge HD10 User Manual - Spanish - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info