15
Timer laps/ timer alarm and confirmation
- The last 10 sec. before the timer lapses are displayed (countdown up to alarm).
- Once the set time of the timer has lapsed, the timer alarm is activated and the assigned cooking zone is
switched off.
- The display and the selected timer LED flash alternating the cooking level from “00” to “H”, if there is
residual heat.
- The warning alarm lasts for at least 2 minutes if the user does not switch it off before.
- The alarm signal switches off after the 2 minutes is up or if any button is pushed.
The buzzer and the timer control light are switched off.
Control panel lock
Locking/ unlocking of the Control panel lock
The keypad is blocked when the Control panel lock button is pressed in the Standby or On mode;
the Control panel lock LED “9” lights permanently.
The control continues to operate in the previously set mode but can no longer be controlled by other
buttons, except by the Control panel lock button or the ON/OFF button.
Switching off with the ON/OFF button is also possible when locked. The Control panel lock button LED
switches off when the Touch control and Control panel lock function are switched off. The LED lights
again if reactivated (within 10 sec.) until it is deactivated by pressing the Control panel lock button once
again. The activation/ deactivation of the Control panel lock function is not possible in the OFF mode.
Unlocking/ deactivation of the Control panel lock
The keypad is unlocked and the Control panel lock LED is switched off when the Key-Lock button is
pressed again in the Standby or On mode. All sensor buttons can once again be activated.
Control panel lock
Activation and deactivation
The activation of the Control panel lock in the pause or active mode causes the deactivation of the
power to both burners.
The symbol “11” appears on the display. It can only be totally turned off with the ON/OFF button or the
release by activating the Control panel lock symbol and then the “+” o “-” symbol a er the beep.
To block the regulation of a burner, activate the TIMER symbol and the “-” symbol related to the
burner at the same time. The Control panel lock “9” LED will light. The control will continue to
operate in the previously set mode and cannot be controlled by other buttons, except for switching off with
the Control panel lock button.
The release is performed by activating again the TIMER symbol and the “-” symbol together.
Instructions for use
Note: Always preheat the cooking surface!
Note: Always preheat the cooking surface!
Use of fats and oils
When using fats and oils, is very important to
select the right temperature. When the right
temperature is set, the important components of the
oils and fats remain. If the temperature is too high,
the fat begins to smoke (the “smoke point”).
SETTING COOKING LEVELS
COOKING LEVELS TEMPERATURES (°C)
1 50
2 75
3 100
4 125
5 150
6 170
7 190
8 205
9 220