611493

KitchenAid KHTD2 38510 Manual

13
Zoom out
Zoom in
Previous page
1/20
Next page
Instructions for use
13
8.8. 8.8.
On/off of the Touch Control
1. Turning On/Off
2. Child Safety (Key Lock)
3. Cooking zone indications
4. Increase power
5. Decrease power
6. Timer (a)
7. Timer (b)
8. LED Timer
9. Key Lock LED
1 COOKING AREA 1,400 W
2 COOKING AREA 1,400 W
The electronic Touch Control is activated by means of the ON/OFF button and switches from the
OFF mode to the Standby mode.
To do so it is necessary to press the ON/OFF button for 1 second. A short Beep will be heard.
When in standby, “0” is displayed on the display of the cooking zone.
This display may go into background due to a residual heat or error signal.
If a cooking zone is activated during the standby time (10 sec.), the control switches over to the On mode.
If no introduction is made within the 10 sec., the control automatically switches to OFF with a short beep.
The electronics can be switched to the OFF mode at any time during the ON mode or the Standby mode by
pressing the ON/ OFF button. The Off function has priority when operating, meaning that the control
switches off even by activating several buttons at the same time.
Switching on a cooking zone
When in the Standby or On mode, a cooking zone can be switched on by means of the Plus/Minus button, as
long as the cooking zone is not in the timer programming mode at that moment (see Timer chapter).
If starting with the “+” button, the cooking level changes from “0” to “4”. If starting with the “-” button, the
cooking level changes from “0” to “9”.
Switching off a cooking zone
a) Pressing the “+” and “-” buttons of the desired cooking zone at the same time.
b) Selecting cooking level “0” of the desired cooking zone with the “-” button.
If the last cooking zone is switched off, the control switches to the OFF mode after 10 sec. if nothing else
is switched on.
All cooking zones are switched off immediately by pressing the ON/OFF button.
Cooking and power levels
The cooking and power levels of the cooking zones are shown on a display.
In accordance with standards, the power levels are displayed with numbers from “1” to “9”.
Residual heat indicator
It tells you if the plate is dangerously hot if in contact with the entire area above the cooking zone. The
temperature is determined by means of a mathematical model and possible residual heat is indicated by “H”
on the corresponding 7 segment display.
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for KitchenAid KHTD2 38510 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of KitchenAid KHTD2 38510 in the language / languages: English as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of KitchenAid KHTD2 38510

KitchenAid KHTD2 38510 User Manual - German - 20 pages

KitchenAid KHTD2 38510 User Manual - Dutch - 20 pages

KitchenAid KHTD2 38510 User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info