581394

KitchenAid 740-0781 Manual

22
Zoom out
Zoom in
Previous page
1/31
Next page
22
Using Your Infrared Searing Burner
Infrared grilling produces intense heat which
quickly sears the meat.
Searing locks in flavor and juices while allowing the outer surface to
absorb smoke and food aroma that is produced as grease and drippings
are vaporized by the burner. The result is a crisp, flavorful outside with a
tender, juicy inside.
Ŷ
Preheat the infrared sear burner for 5 minutes.
Ŷ
Ensure th
at meats are fully thawed and that all excess fat is trimmed
away prior to grilling.
Ŷ
Leav
e the burner set to HI when placing food on the grill to sear.
Ŷ
Use the s
ear burner to sear meat 1 to 2 minutes on each side, then
move the meat to the main grill cooking surface to finish grilling to
the desired doneness.
NOTE: Grates are to be in place when using the infrared sear burner.
Lighting the Infrared Searing Burner
1. Do not lean over the grill.
2. Push in and turn the
control knob to IGNITE/ON. You will hear the
“snapping” sound of the spark.
3. When the infrared searing burner lights, continue to hold the knob in
for another 10 seconds, then release the knob and burner will stay lit.
You will hear the “snapping” sound of the spark until the knob is
released.
IMPORTANT: If the infrared searing burner does not light
immediately, turn the burner knob to OFF and wait 5 minutes before
relighting.
Manually Lighting the Infrar
ed Searing Burner
1. Do not lean over the grill.
2. Remove the manual lighting extension
(see following illustration)
and attach a match to the split ring.
3. Strike the match to light it.
4. Gently hold the lit
match close to the infrared searing burner.
5. Push in and turn the control knob to IGNITE/ON. Hold this knob in
for 10 seconds after the burner is lit. You will hear the “snapping”
sound of the spark until after the knob is released.
IMPORTANT: If the infrared searing burner does not light
immediately, turn the searing burner control knob to OFF and wait 5
minutes before relighting.
6. Remove the match and replace the manual lighting extension in its
holder.
Using Your Rotisserie Burner
A Rotisserie
kit can be purchased as an accessory for the grill. See
“Accessories” in the “Assistance” section.
To avoid damage to the warming rack, remove from grill when using the
rotisserie burner.
Do not use the main burners when the rotisserie burner is in use.
Lighting the Rotisserie Burner
1. Do not lean over the
grill.
2. Push in and turn the control knob to IGNITE/ON. You will hear the
“snapping” sound of the spark.
3. When the rotisserie burner lights, continue to hold the knob in for
another 10 seconds, then release the knob and burner will stay lit.
You will hear the “snapping” sound of the spark until the knob is
released.
IMPORTANT: If the rotisserie burner does not light immediately, turn
the burner knob to OFF and wait 5 minutes before relighting.
A. Lighting ex
tension
A
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for KitchenAid 740-0781 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of KitchenAid 740-0781 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 4,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info