772982
59
Zoom out
Zoom in
Previous page
1/82
Next page
MY20K10-02_1.0_10.11.2020 59
Cleaning and servicing
7.4.5 Checking the brake discs for wear
Check that the brake disc is no less than
1.8 mm at any point.
The brake discs have not reached their wear
limit yet; brake discs need to be replaced if
they have. Contact your specialist dealer.
7.4.6 Electrical cables and brake cables
Check all visible electrical cables and cables
for damage. If the sheathing is compressed, a
brake is defective or a light does not work, the
S pedelec must be removed from service until
the lines or cables have been repaired. Contact
your specialist dealer.
7.4.7 Gear shift
Check the gear shift and the shifter or the twist
grip setting and adjust it as necessary.
7.4.8 Stem
The stem and quick release system must be
inspected at regular intervals. The specialist
dealer should adjust them if necessary.
If the hexagon socket head screw is also
loosened, the headset backlash also needs to
be adjusted. Medium-strength thread locker,
such as Loctite blue, then needs to be applied
to the loosened screws and the screws
tightened as per specifications.
Contact your specialist dealer if there is any
wear or signs of corrosion.
7.4.9 USB port
7.4.10 Checking the belt and chain tension
1Check the chain tension in three or four
positions, turning the crank a full revolution.
Figure 40: Checking the chain tension
2If the chain can be pushed more than 2 cm, the
chain or drive belt will need to be tensioned
again by the specialist dealer.
3If the chain or the drive belt can only be pushed
up and down less than 1 cm, you will need to
slacken the chain or the drive belt.
The optimum chain tension is achieved if the
chain or the drive belt can be pushed a
maximum of 2 cm in the middle between the
pinion and the toothed wheel. The crank must
also turn without resistance.
4If a hub gear is featured, the rear wheel must
be pushed backwards or forwards to tighten
the chain. Contact your specialist dealer.
5Check the handlebar grip is firmly in position.
Notice
Any moisture penetrating through the USB port
may cause a short circuit in the display.
Regularly check the position of the cover on the
USB port and adjust it as necessary.
Notice
Excessive chain tension increases wear.
If the chain tension is too low, there is a risk that
the chain or the drive belt will slip off the chain
wheels.
Check the chain tension once a month.
2 cm
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kettler Velossi 2.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kettler Velossi 2.0 in the language / languages: English as an attachment in your email.

The manual is 7.33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kettler Velossi 2.0

Kettler Velossi 2.0 User Manual - German - 83 pages

Kettler Velossi 2.0 User Manual - Dutch - 82 pages

Kettler Velossi 2.0 User Manual - French - 84 pages

Kettler Velossi 2.0 User Manual - Spanish - 85 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info