772982
58
Zoom out
Zoom in
Previous page
1/82
Next page
MY20K10-02_1.0_10.11.2020 58
Cleaning and servicing
7.4.1.4 Checking and adjusting the tyre
pressure – Presta valve
Only applies to S pedelecs with this equipment
It is recommendable to use
a bicycle pump with a
pressure gauge. The
operating instructions for
the bicycle pump must be
adhered to.
1Unscrew and remove the
valve cap.
2Open the knurled nut
around four turns.
3Carefully apply the bicycle
pump so that the valve
insert is not bent.
4Pump up the tyre slowly and pay attention to
the tyre pressure in the process.
5Correct the tyre pressure as per the
specifications on the tyre.
6Remove the bicycle pump.
7Tighten the knurled nut with your fingers.
8Screw the valve cap tight.
9Screw the rim nut gently against the rim with
the tips of your fingers.
7.4.1.5 Checking and adjusting the tyre
pressure – Schrader valve
Only applies to S pedelecs with this equipment
It is recommendable to use a
bicycle pump with a
pressure gauge. The
operating instructions for the
bicycle pump must be
adhered to.
1Unscrew and remove the
valve cap.
2Attach the bicycle pump.
3Pump up the tyre slowly and pay attention to
the tyre pressure in the process.
The tyre pressure has been adjusted as per the
specifications.
4Remove the bicycle pump.
5Screw the valve cap tight.
6Screw the rim nut (1) gently against the rim
with the tips of your fingers.
7.4.2 Brake system
The maintenance interval for the brake depends
on the weather conditions and how frequent the
bicycle is used. If the S pedelec is used under
extreme conditions such as rain, dirt or high
mileage, maintenance must be performed more
frequently.
7.4.3 Checking the brake linings for wear
Check brake linings after brake has been fully
applied 1,000 times.
1Check that the brake linings are no less than
1.8 mm wide at any point and no less than
2.5 mm between the brake lining and
supporting plate.
2Push brake lever and hold. In doing so, check
the transport safety wear gauge can fit
between the brake lining supporting plates.
The brake linings have not reached their wear
limit. Contact your specialist dealer if any of
these components have become worn.
7.4.4 Checking the pressure point
Push brake lever and hold several times.
If you are unable to clearly detect the pressure
point and it changes, the brake needs to be
bled. Contact your specialist dealer.
Crash caused by brake failure
Worn brake discs and brake linings, as well as a
lack of hydraulic fluid in the brake cable, reduce
the braking power. This may cause a crash with
injuries.
Check the brake disc, brake linings and
hydraulic brake system on a regular basis.
Contact your specialist dealer if any of these
components have become worn.
CAUTION
!
1
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kettler Velossi 2.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kettler Velossi 2.0 in the language / languages: English as an attachment in your email.

The manual is 7.33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kettler Velossi 2.0

Kettler Velossi 2.0 User Manual - German - 83 pages

Kettler Velossi 2.0 User Manual - Dutch - 82 pages

Kettler Velossi 2.0 User Manual - French - 84 pages

Kettler Velossi 2.0 User Manual - Spanish - 85 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info