Custom settings
Changes can be made in the following menu items:
• Activate Bluetooth (optional)
• Km or miles display
• Delete total kilometres
• Activate warning beep in PULSEHOLD function
• Display in standby mode
Press and hold the "SET" key. All the segments are displayed,
press the left arrow and right arrow keys at the same time.
First of all you can activate Bluetooth using the arrow keys =
"blu On" or deactivate it = "blu OFF".
A 6 digit ID is displayed.
Press "SET" to complete the selection and skip to the next menu
item "Kilometres or miles" display.
Here you decide whether "SPEED" and DISTANCE" is displayed
in kilometres or miles.
You change the flashing displays using the arrow keys.
Press "SET" to complete the selection and skip to the next menu
item "Delete total kilometres".
Using the arrow keys you choose del yes/no.
Press "SET" to complete the selection and skip to the next menu
item "Activate warning beep in PULSEHOLD function".
Here you choose whether a warning beep should be sounded
when you deviate from the PULSEHOLD value.
You activate monitoring using the arrow keys.
Press "SET" to complete the selection and skip to the next menu
item "Eco".
Here you set whether the display is switched off using "On" in
standby mode or if "OFF" is kept as the default.
You select the setting using the arrow keys.
The software version is also displayed here.
Press "Set" to finish your input and restart the display.
Interface
The display has a mini USB port. A 3 metre long cable to
connect to a PC is supplied.
Training software and firmware update
The WORLD TOURS 2.0 software allows you to control this
device using a PC / laptop via this interface. You can find infor-
mation about our training software
and firmware updates for this device on our website www.kett-
ler.net.
Instructions for use
You can find more up-to-date instructions for use on our website
www.kettler.net under Sport > SERVICE-CENTER > Computer
instructions.
Training and operating instructions
16
GB
=>
+