772983
56
Zoom out
Zoom in
Previous page
1/128
Next page
MY20K10 - 12_1.0_11.01.2021 56
Operation
6.5.4.1 Retracting the brake linings
Disc brakes require wearing-in time. The braking
force increases over time. You therefore need to be
aware that the braking force may increase during the
wearing-in period. The same happens after brake
pads or discs are replaced.
1Accelerate S pedelec to about 25 km/h.
2Brake S pedelec until it comes to a halt.
3Repeat process 30 - 50 times.
The disc brake is retracted and provides optimal
braking power.
6.5.4.2 Setting the grip distance on a Magura
disc brake lever
You can adjust the brake lever position (grip
distance) to your requirements. Such adjustment
does not affect the pressure point or the position
of the brake linings.
Use a T25 TORX® wrench to turn the setting
screw (1) to adjust the grip distance.
Figure 63: Adjusting the grip distance on a Magura disc brake
lever
Turn the setting screw/twist knob (5) anti-
clockwise towards minus (–).
The brake lever moves closer to the handlebar
grip.
Turn the setting screw clockwise towards
plus (+).
The brake lever moves away from the
handlebar grip.
6.5.4.3 Setting the pressure point on a Magura
brake lever
The pressure point setting is adjusted using the
twist knob.
Turn the twist knob towards the plus (+)
symbol.
The brake lever moves closer to the handlebar
grip. Re-adjust the grip distance as necessary.
The lever pressure point activates sooner.
Figure 64: Using the twist knob (1) to adjust the pressure
point
Crash caused by incorrectly set grip distance
If brake cylinders are set incorrectly or installed
wrongly, the braking power may be lost at any
time. This may cause a crash with injuries.
Ensure that the fully applied brake lever is at a
minimum distance of 20 mm from the
handlebars (4).
WARNING
!
Brake failure due to incorrect setting
If the pressure point is set with brakes where the
brake linings and brake disc have reached their
wear limit, the brakes may fail and cause an
accident with injury.
Before you adjust the pressure point, ensure
that the brake linings and brake disc have not
reached their wear limit.
WARNING
!
1
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kettler Quadriga Duo CX Speed at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kettler Quadriga Duo CX Speed in the language / languages: English as an attachment in your email.

The manual is 14.01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kettler Quadriga Duo CX Speed

Kettler Quadriga Duo CX Speed User Manual - German - 131 pages

Kettler Quadriga Duo CX Speed User Manual - Dutch - 128 pages

Kettler Quadriga Duo CX Speed User Manual - Danish - 126 pages

Kettler Quadriga Duo CX Speed User Manual - French - 129 pages

Kettler Quadriga Duo CX Speed User Manual - Spanish - 132 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info