772983
54
Zoom out
Zoom in
Previous page
1/128
Next page
MY20K10 - 12_1.0_11.01.2021 54
Operation
6.5.1.3 Adjusting the seat height with quick
release
1Open the quick release on the seat post to
change the seat height (1). To do so, push the
clamping lever away from the seat post (3).
Figure 58: Opening the seat post quick release
2Set the seat post to the required height.
Figure 59: Detailed view of the seat post – examples of the
minimum insertion depth marking
3To close it, push the seat post clamping lever as
far as it will go into the seat post (2).
4Check the clamping force of quick releases.
6.5.1.4 Adjusting the seat position
The saddle can be shifted on the saddle frame.
The right horizontal position ensures an optimal
leverage position for legs. This prevents knee
pain and painful incorrect pelvis positions. If you
have displaced the saddle more than 10 mm, you
need to adjust the saddle height again since both
settings affect one another.
To adjust the seat position safely, either push the
S pedelec near to a wall, so that you can lean on
the wall to support yourself or ask another person
to hold the S pedelec for you.
1Climb onto the S pedelec.
2Place the pedals into the vertical position with
your feet.
The rider is sitting in the optimal sitting position if
the perpendicular line from the kneecap runs
through the pedal axle.
3.1If the perpendicular line crosses behind the
pedal, bring the saddle further forward.
3.2If the perpendicular line crosses in front of the
pedal, bring the saddle further back.
4Move the saddle within its permitted
displacement range only (marked on the
saddle stay).
Figure 60: Knee cap perpendicular line
Crash caused by an excessively high seat post
setting
A seat post which is set too high will cause the
seat post or the frame to break. This will cause a
crash with injuries.
Do not pull the seat post out of the frame
beyond the minimum insertion depth marking.
3
4
5
1
2
3
CAUTION
!
3
4
2
1
The handlebar settings must only be adjusted
while the S pedelec is stationary.
Unfasten and adjust the designated screw
connections, and clamp them with the
maximum tightening torque for the clamping
screws of the handlebars.
90°
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kettler Quadriga Duo CX Speed at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kettler Quadriga Duo CX Speed in the language / languages: English as an attachment in your email.

The manual is 14.01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kettler Quadriga Duo CX Speed

Kettler Quadriga Duo CX Speed User Manual - German - 131 pages

Kettler Quadriga Duo CX Speed User Manual - Dutch - 128 pages

Kettler Quadriga Duo CX Speed User Manual - Danish - 126 pages

Kettler Quadriga Duo CX Speed User Manual - French - 129 pages

Kettler Quadriga Duo CX Speed User Manual - Spanish - 132 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info