683161
172
Zoom out
Zoom in
Previous page
1/196
Next page
Linear Amplifier Menu Screen
1 Press [MENU].
2 Press F [LINEAR AMP] to display the Linear
Amplifier menu screen.
If F [LINEAR AMP] is not displayed, press F [MORE] to
display F [LINEAR AMP].
.
3 Press F6 [BAND] to switch to the target band.
Pressing F6 [BAND] each time toggles the selection to “HF
Band”, “50 MHz Band” and “70 MHz Band” (E type only) in
sequence.
4
Press F2 [ ]/ F3 [ ] to select the setting item.
5 Press F4 [–]/ F5 [+] or turn the [MULTI/CH] control
to select the setting value.
The following settings are recommended when using the
TL-922 (discontinued).
Settings Menu
TL-922
Linear Amplifier On
Keying Logic Active Low
TX Delay On
TX Delay Time (CW/FSK/PSK) 15
TX Delay Time (SSB/FM/AM) 35
Internal Relay Control On
External ALC Voltage -6 [V]
6 Press [MENU] or [ESC] to end the process.
Pressing F [MENU TOP] returns the display to the menu top
screen.
Turning ON/OFF Linear Amplifier
Switch the linear amplifier function for each target band to ON or
OFF.
Configure
Linear Amplifier in Linear Amplifier
Menu
Setting Value Off (default)/ On
Linear Amplifier TX Control
TX control of the linear amplifier without using relay control can be
performed via the 7-pin LKY terminal of the REMOTE connector.
This function is used for TX control when using a linear amplifier
that supports full break-in.
Configure
Keying Logic in Linear Amplifier Menu
Setting Value Active Low (default)/ Active High
Turning ON/OFF Linear Amplifier TX Delay
Delay the switching operation by the transmission system of this
transceiver when there is a long time lag before transmission starts
on the linear amplifier in use.
Configure TX Delay in Linear Amplifier Menu
Setting Value Off (default)/ On
When the TX delay of the linear amplifier is ON, TX delay
time is added to the time from when transmission is
started until the radio wave is output (usually about 15
ms).
Linear Amplifier TX Delay Time
The TX delay time when using a linear amplifier can be configured
separately for the CW/FSK/PSK and SSB/FM/AM modes.
CW/FSK/PSK Mode
Configure TX Delay Time (CW/FSK/PSK) in Linear
Amplifier Menu
Setting Value 5/ 10/ 15 (default)/ 20/ 25/ 30/ 35/ 40 [ms]
SSB/FM/AM Mode
Configure TX Delay Time (SSB/FM/AM) in Linear
Amplifier Menu
Setting Value 5/ 10/ 15/ 20/ 25/ 30/ 35 (default)/ 40/ 45/ 50 [ms]
Linear Amplifier Relay Control
When using a linear amplifier that requires TX control via a
mechanical relay, the built-in mechanical relay terminals of this
transceiver (pin 4 MKE terminal, pin 5 BRK terminal, pin 2 COM
terminal of the REMOTE connector) are used.
Configure
Internal Relay Control in Linear
Amplifier Menu
Setting Value Off (default)/ On
On: Activates the following relay control.
The MKE terminal is connected to the COM terminal during
transmission.
The BRK terminal is connected to the COM terminal when
there is no transmission.
Off: Relay control is not activated and the BRK terminal remains
connected to the COM terminal at all times.
When using a linear amplifier that does not require control
via a mechanical relay, configure to “Off” to minimize the
relay sound.
External ALC Voltage of Linear Amplifier
Adjust the response of the ALC terminal (pin 6) of the REMOTE
connector on this transceiver according to the linear amplifier in
use.
Configure
External ALC Voltage in Linear
Amplifier Menu
Setting Value
-1/ -2/ -3/ -4 (default)/ -5/ -6/ -7/ -8/ -9/ -10/ -11/
-12 [V]
Under normal circumstances, make adjustments on the
linear amplifier without changing the default setting.
16 OTHER FUNCTIONS
16-14
172


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TS-890S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TS-890S in the language / languages: English as an attachment in your email.

The manual is 21,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TS-890S

Kenwood TS-890S User Manual - German - 196 pages

Kenwood TS-890S User Manual - Dutch - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info