683161

Kenwood TS-890S Manual

174
Zoom out
Zoom in
Previous page
1/196
Next page
Antenna Output for External Receivers
When this function is ON, the RX signal that enters the transceiver
from the currently selected antenna (ANT 1, ANT 2 or RX ANT) is
split along the way. A part of the split signal is input to the RX circuit,
while the other part to the ANT OUT terminal.
Press and hold [RX ANT] to set the antenna output
for external receiver to ON or OFF.
•
When it is ON, << >> lights up.
●
When the antenna output function is used, the RX
sensitivity and gain lower by approximately 3 dB due to
signal loss in the splitter.
●
During transmission, there is a very slight amount of
output leakage due to internal isolation (approximately
-20 dBm in the 50 MHz band).
●
The ON/OFF status of the antenna output function is
stored separately for the HF band and 50/70 MHz band.
Emergency Call (K Type Only)
Section 97.401(d) of the regulations governing amateur radio in
the United States permit emergency amateur communications on
5167.5 kHz by stations in or within 92.6 km of the state of Alaska.
This frequency is for use only when the immediate safety of human
life and/or property are threatened, and is never to be used for
routine communications.
Press [EMERGENCY] to change to the Emergency channel
(5167.5 kHz/ USB).
•
[EMERGENCY] can be assigned to a PF key.
•
When entering Emergency mode, “EMERGENCY”
momentarily appears on the screen.
●
RIT/XIT turns OFF automatically when entering
Emergency mode.
●
The transceiver will not switch to the Emergency channel
if you are using the constant recorder and are either
transmitting, receiving a voice call, or receiving a CW
call.
Crossband Repeater
If you have a KENWOOD FM transceiver (K type) with a 6 pin mini
DIN connector, you can set up the TS-890S transceiver and the
FM transceiver as a crossband repeater. The FM transceiver will
receive signals you transmit from the additional VHF or UHF
transceiver when both transceivers are set with the same
frequency. The signal is then routed to the TS-890S transceiver
and retransmitted on the frequency you have set on the TS-890S
transceiver. Likewise, signals received on the TS-890S
transceiver are routed to the FM transceiver and retransmitted to
the transceiver you have with you, allowing you to hear the
received call in a distant location.
●
For the repeater function to operate, the squelch levels
of both transceivers (TS-890S and FM transceiver) must
be adjusted properly so that no background noise can
be heard; the transmission is controlled by monitoring
the squelch status only.
Connection
.
TM-D700A
TM-D710GA/
TM-D710A/
TM-V71A
TS-890S
PR1
SQC
PKSPSQ
PKD
PKS
ANI
ANO
16 OTHER FUNCTIONS
16-16
… 174 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TS-890S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TS-890S in the language / languages: English as an attachment in your email.

The manual is 21,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TS-890S

Kenwood TS-890S User Manual - German - 196 pages

Kenwood TS-890S User Manual - Dutch - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info