Manual Kenwood TS-890S (page 156 of 196) (English)

683161

156

Zoom out

Zoom in

1/196

3 Use the function keys, [MULTI/CH] control or USB

keyboard to enter a character string.

Key Behavior

F1 [SPACE] Inserts a space.

F2 [–]/ F3 [+] Selects a character.

F4 [ ]/ F5 [ ]

Moves the cursor.

F [BACK SPACE]

Deletes the character to the left of the

cursor.

F [DEL]

Deletes the character to the right of the

cursor.

F [CHAR]

Switches the type of character to edit.

Pressing the key each time switches the

selection in the following sequence:

ABC (upper case) → !”# (symbols) →

ABC (upper case)

4 Press F6 [SAVE] to save the administrator ID and

password.

•

Each of the ID and password must not be longer than 32

characters.

●

When the KNS Operation is ON, the KNS “Administrator

ID” and “Administrator Password” cannot be edited or

reset.

Built-in VoIP Function

Follow the steps below to configure whether to use the built-in VoIP

function for voice communication between the remote PC and

transceiver during KNS operation.

Set this function to ON (default setting) to use the built-in VoIP

function for voice communication between the remote PC and

transceiver. Set this function to OFF when using ARVP-10 or a

non-KENWOOD VoIP software program.

Select KNS Menu [3] “Built-in VoIP”.

2 Press F4 [SELECT].

3 Press F2 [–]/ F3 [+] to select “On” or “Off”.

Setting Value Off/ On (default)

●

When the setting is changed while a connection is

established (logged in), the new setting will be applied

at the next connection.

●

When using the built-in VoIP, check the following

settings as well. For more details, please refer to the

“TS-890S KENWOOD NETWORK COMMAND

SYSTEM Setting Manual”.

•

Check that the TX operation setting in the modulation

line selection for ARCP-890 matches the audio input

of the modulation line configured on this transceiver.

•

Check that audio input of the modulation line

configured on this transceiver in the “Switching the

Audio Source Input” (8-1) section matches the TX

operation setting selected in the modulation line

selection for ARCP-890.

Audio Input/Output Level of Built-in VoIP

The audio input and output level when using the VoIP can be

adjusted as follows. Use the default setting under normal

circumstances.

Select KNS Menu [4] “Audio Input Level (VoIP)” and

KNS Menu [5] “Audio Output Level (VoIP)”.

2 Press F4 [SELECT].

3 Press F2 [–]/ F3 [+] to select the level.

Setting Value

0 to 50 (default: Menu 4) to 100 (default: Menu

5) (1 step)

Built-in VoIP Jitter Absorption Buffer

Follow the steps below to adjust this item when there is a problem

with the voice quality of VoIP. Selecting a shorter time reduces the

audio delay but noise is more likely to occur due to missing audio

packets or the like. Selecting a longer time increases the audio

delay but noise occurrence due to missing audio packets or the

like is potentially reduced. Set the value as small as possible within

a range that does not affect the operation.

Select KNS Menu [6] “VoIP Jitter Buffer”.

2 Press F4 [SELECT].

3 Press F2 [–]/ F3 [+] to select a jitter absorption time.

Setting Value 80 (default)/ 200/ 500/ 800 [ms]

●

When the setting is changed while the built-in VoIP is in

use, the new setting will be applied the next time VoIP is

used.

Prohibition of Remote Volume Control

This is the function to mute the speaker of the transceiver during

remote operation via KNS.

Use this function during remote operation to stop the audio output

from the speaker of the transceiver.

Select KNS Menu [7] “Speaker Mute”.

2 Press F4 [SELECT].

3 Press F2 [–]/ F3 [+] to select “On” or “Off”.

Setting Value Off (default)/ On

15 NETWORK/KNS OPERATION

15-4

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TS-890S in the language / languages: English as an attachment in your email.

The manual is 21,11 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TS-890S

Kenwood TS-890S User Manual - German - 196 pages

Kenwood TS-890S User Manual - Dutch - 196 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kenwood TS-890S Manual

Product: