683161
127
Zoom out
Zoom in
Previous page
1/196
Next page
When the built-in memory is selected as the destination
for saving files and while manual recording or CW/RTTY/
PSK communication log recording is in progress,
selecting a file to copy followed by pressing F4 [OK] will
result in an error and an “unable to copy” message will
be displayed.
Pressing F7 [CANCEL] while the “preparing to copy”
screen is displayed starts the cancel copy operation.
When the cancel copy operation is complete, the display
returns to the USB/File Management menu screen.
After the “preparing to copy” screen is displayed, a
“confirmation tone” is output once the copy preparation
is completed and a copy standby screen is displayed on
the PC. Then, a removable device with the name
TS-890 appears on the PC.
When a remote user is logged in via the KNS function
and the communication log is set to ON, selecting “KNS
Log Files” and pressing F4 [OK] will result in an error and
an “unable to copy” message will be displayed.
8 Access the removable device named “TS-890” from
the PC and copy the files or folders to the PC.
9 After copy is complete, remove the removable
device (“TS-890”) safely from the PC.
The files may not be copied successfully if the proper
steps to remove the device safely from the PC are not
observed.
10 Press F4 [EXIT].
A confirmation screen on the batch deletion of files is displayed.
Items for which the checkboxes are selected on the screen for
selecting the files to copy can be deleted from the built-in
memory.
Pressing and holding F4 [(DELETE)] executes the file
deletion operation.
Pressing F7 [KEEP] leaves the files intact and returns the
display to the USB/File Management menu screen.
11 Press [ESC] to end the process.
Deleting Files (Built-in Memory)
Follow the steps below to delete settings data or audio data from
the built-in memory. Deletion will apply to the function folders that
contain the corresponding files.
1 Press [MENU].
2 Press F [USB/FILE] to display the USB/File
Management menu screen.
If F [USB/FILE] is not displayed, press F [MORE] to display
F [USB/FILE].
3
Press F2 [ ]/ F3 [ ] to select Delete Files
(Internal Memory).
4 Press F4 [SELECT].
A screen for selecting the files to delete is displayed.
.
5
Press F2 [ ]/ F3 [ ] or turn the [MULTI/CH]
control to select the items to delete.
6
Press F5 [ ] to select the checkbox to the left
of the settings data name.
Pressing F5 [ ] again deselects the checkbox. (Files
are not deleted.)
Pressing F6 [CLR.ALL] deselects all the checkboxes.
Select at least 1 item to delete.
Pressing F7 [CANCEL] returns the display to the USB/File
Management menu screen.
7 Press F4 [OK].
A file deletion confirmation screen is displayed.
8 Press F4 [OK].
File deletion starts.
Pressing F7 [CANCEL] returns the display to the file
deletion confirmation screen without deleting the files.
9 Press [ESC] to end the process.
When the built-in memory is selected as the destination
for saving files and the item to be deleted coincides with
an item for which manual recording or CW/RTTY/PSK
communication log recording is in progress, pressing F4
[OK] will result in an error and an “unable to delete”
message will be displayed.
When a remote user is logged in via the KNS function
and the communication log is set to ON, selecting “KNS
Log Files” as an item to delete and pressing F4 [OK] will
result in an error and an “unable to delete” message will
be displayed.
Formatting a USB Flash Drive
The USB flash drive needs to be formatted by this transceiver
before it can be used. USB flash drives cannot be recognized if
they are not formatted by this transceiver.
Formatting a USB flash drive using this transceiver
erases all data that exist in the USB flash drive. As such,
make sure to save the necessary data to a PC or other
external data storage devices before deleting.
1
Insert the USB flash drive into the (USB-A)
connector.
<< >> starts to blink and lights up when the USB flash drive
is recognized by this transceiver.
2
Select Format USB Flash Drive in the USB/File
Management menu.
3 Press F4 [SELECT] to start formatting.
A message to confirm the start of the formatting process is
displayed.
Pressing F7 [CANCEL] ends the operation without
formatting the USB flash drive.
4 Press F4 [OK].
When formatting is complete, the display returns to the USB/
File Management menu screen.
Copying Files to a USB Flash Drive
Files that are stored in the built-in memory of this transceiver can
be copied to a USB flash drive.
Insert a USB flash drive formatted using this transceiver into
(USB-A).
1 Press [MENU].
2 Press F [USB/FILE] to display the USB/File
Management menu screen.
If F [USB/FILE] is not displayed, press F [MORE] to display
F [USB/FILE].
USB/FILE MANAGEMENT 11
11-5
127


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TS-890S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TS-890S in the language / languages: English as an attachment in your email.

The manual is 21,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TS-890S

Kenwood TS-890S User Manual - German - 196 pages

Kenwood TS-890S User Manual - Dutch - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info