683161
128
Zoom out
Zoom in
Previous page
1/196
Next page
3
Press F2 [ ]/ F3 [ ] to select Copy Files to
USB Flash Drive.
4 Press F4 [SELECT].
A screen for selecting the files to copy is displayed.
.
5
Press F2[ ] or F3[ ], or turn the [MULTI/CH]
control to select the items to copy.
6
Press F5 [ ] to select the checkbox to the left
of the settings data name.
Pressing F5 [ ] again deselects the checkbox. (Files
are not copied.)
Pressing F6 [CLR.ALL] deselects all the checkboxes.
The items that can be copied are the same as those in the
table in “Copying Files to a PC”. Select at least 1 item.
7 Press F4 [OK].
Copy starts and a copy in progress screen is displayed.
After file copying is complete, a confirmation screen on the
batch deletion of files is displayed.
Items for which the checkboxes are selected on the screen for
selecting the files to copy can be deleted from the built-in memory.
Pressing and holding F4 [(DELETE)] executes the file
deletion operation.
Pressing F7 [KEEP] leaves the files intact and returns the
display to the USB/File Management menu screen.
8 Press [ESC] to end the process.
If the number of files exceeds 255 while copy is in
progress, the copy operation stops.
When removing the USB flash drive, make sure to execute
Safely Removing the USB Flash Drive” (11-6).
If the same file on the source location is also found in the
destination USB flash drive, the latter file will be overwritten.
If there is insufficient memory in the USB flash drive for
all the files to be copied, pressing F4 [OK] will result in
an error and “Insufficient Memory Size” will be displayed
on the screen.
Pressing F7 [CANCEL] while copying is in progress
starts the cancel copy operation. When the cancel copy
operation is complete, the display returns to the USB/File
Management menu screen.
While manual recording or CW/RTTY/PSK
communication log recording is in progress, selecting a
file to copy followed by pressing F4 [OK] will result in an
error and an “unable to copy” message will be displayed.
When a remote user is logged in via the KNS function
and the communication log is set to ON, selecting “KNS
Log Files” and pressing F4 [OK] will result in an error and
an “unable to copy” message will be displayed.
Safely Removing the USB Flash Drive
When removing a USB flash drive from this transceiver, make sure
to follow the steps below to remove the device safely. Failure to do
so may result in the damage of the USB flash drive, settings data
files and audio data files or malfunction of this transceiver.
1 Press [MENU].
2 Press F [USB/FILE] to display the USB/File
Management menu screen.
If F [USB/FILE] is not displayed, press F [MORE] to display
F [USB/FILE].
3
Press F2 [ ]/ F3 [ ] to select Safe Removal of
USB Flash Drive.
4 Press F4 [SELECT].
A message on the safe removal of the USB flash drive is displayed.
.
Pressing F7 [CANCEL] ends the operation without
performing the safe removal of the USB flash drive.
5 Press F4 [OK].
Safe removal starts.
.
.
6 Press F4[OK].
The USB flash drive can now be removed.
7 Press [ESC] to end the process.
11 USB/FILE MANAGEMENT
11-6
128


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TS-890S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TS-890S in the language / languages: English as an attachment in your email.

The manual is 21,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TS-890S

Kenwood TS-890S User Manual - German - 196 pages

Kenwood TS-890S User Manual - Dutch - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info