683161
76
Zoom out
Zoom in
Previous page
1/196
Next page
RTTY Message Memory
Fixed phrases that are often used in the RTTY mode can be
registered in advance as an RTTY message in the RTTY message
memory. Configuring a message to be saved to auto transmission
(Auto TX) or auto reception (Auto RX) enables the RTTY message
to be transmitted via simple operation. Up to 8 types of RTTY
messages can be registered to Channels 1 to 8 in the memory.
Registering RTTY Messages
1 Press F5 [MEMORY] on the RTTY communication
screen to display the RTTY Message screen.
.
2
Press F3[ ] / F4[ ] or turn the [MULTI/CH]
control to select the channel for saving the RTTY
message.
3 Press F5 [MSG] to enter the RTTY message memory
edit mode.
.
4 Use the function keys, [MULTI/CH] control or USB
keyboard to enter a character string.
Key Behavior
F1 [SPACE] Inserts a space.
F2 [–]/ F3 [+] Selects a character.
F4 [ ]/ F5 [ ]
Moves the cursor.
F [BACK SPACE]
Deletes the character to the left of the
cursor.
F [DEL]
Deletes the character to the right of the
cursor.
F [CHAR]
Switches the type of character to edit.
Pressing the key each time switches the
selection in the following sequence:
ABC (upper case) → !”# (symbols) →
ABC (upper case)
5 Press F6 [SAVE] to save the RTTY message.
Pressing F7 [CANCEL] discards the content that is currently
being edited and exits the character string input mode.
Alphanumeric characters and symbols that can be input (up
to 70 characters)
A
B C D E F G H I J K L M N
O P Q R S T U V W X Y Z 0 1
2 3 4 5 6 7 8 9 ! # $ &
( ) . , - ? : ; /
Space
Line
Break
Configuring Auto TX/RX for the RTTY Message
Memory
The transmission and reception behavior can be configured when
an RTTY message memory channel is selected.
Auto TX places this transceiver in the TX mode before
transmitting a message when a message memory channel is
selected, and maintain the TX mode after all messages have
been sent out.
For auto RX, pressing [F12] after selecting a message memory
channel for transmission places this transceiver in the TX mode.
When the message is sent out, this transceiver is automatically
restored to the RX mode.
Combining auto TX and auto RX enables both transmission and
reception to be performed automatically.
1
Press F3[ ] / F4[ ] or turn the [MULTI/CH]
control to select the message for auto TX/RX.
2 Press F6 [AUTO.TX] to set auto TX to ON.
<< >> is displayed to the right of the RTTY
message.
.
When auto TX is set to OFF, the << >> display
goes off, and the RTTY message of the channel is
temporarily placed in the character string buffer but not
transmitted automatically.
3 Press F7 [AUTO.RX] to set auto RX to ON.
<< >> is displayed to the right of the RTTY
message.
When auto RX is set to OFF, the <<
>> display
goes off, and this transceiver is not restored to the RX mode
after the RTTY message for the channel has been sent out.
To sent an RTTY message for which “AUTO TX” is
configured to “OFF”, select the channel in which the
RTTY message is stored. Check to ensure that the
character string (RTTY message) is forwarded to the
character string buffer, followed by pressing [F12] on the
USB keyboard.
To switch this transceiver to the RX mode after
transmitting an RTTY message for which “AUTO RX” is
set to OFF, press [F12] on the USB keyboard after the
RTTY message has been sent out.
5 COMMUNICATING AIDS
5-20
76


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TS-890S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TS-890S in the language / languages: English as an attachment in your email.

The manual is 21,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TS-890S

Kenwood TS-890S User Manual - German - 196 pages

Kenwood TS-890S User Manual - Dutch - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info