606693
74
Zoom out
Zoom in
Previous page
1/104
Next page
68
11 OPERATOR CONVENIENCES
VS-2 VOICE SYNTHESIZER (OPTIONAL)
When equipped with the VS-2 Voice Synthesizer unit,
the TS-870S can announce displayed information. A
Programmable Function (PF) button must be assigned
the VOICE function to use the Voice Synthesizer. Refer
to “PROGRAMMABLE FUNCTION BUTTONS”
{page 64} for more information.
When the VOICE PF button is pressed while an
announcement is in progress, the announcement stops
immediately. Similarly, changing the parameter that is
being announced, such as tuning to another frequency,
automatically halts the announcement. Frequencies are
announced beginning with the 10 MHz digit and
continuing through to the 10 Hz digit for VFO or memory
channel frequencies. If the memory channel has no
data stored, then “OPEN” is announced.
In addition to frequencies, Menu numbers and their
settings are also announced with a short pause
(100 ms) between the Menu number and the setting.
Refer to the following table for the cross-reference
between the displayed and the announced information.
VOICE SYNTHESIZER ANNOUNCEMENTS
Transmitting Messages (Manual TX/RX)
Use this procedure to transmit the contents of a
message memory.
1 Select SSB, FM, or AM mode by pressing
[LSB/USB] or [FM/AM].
The transmit and receive modes must be the
same.
2 Press [SEND] or Mic [PTT].
3 Press [CH 1], or [CH 2], or [CH 3], or [CH 4] to
play back the message in the respective memory.
4 Press [SEND] again or release Mic [PTT] to
return to the receive mode.
CONTINUOUS MULTI-CHANNEL PLAYBACK
You can also play back messages one after the other, in
any order, to make longer messages. You could, for
example, first play channel 3 followed by channel 1,
then channel 4, then channel 2.
If the Repeat function is activated while playing back
messages, the remainder of the selected messages are
played back, then playback begins again from the
beginning of the series of messages. The cycle repeats
until you manually interrupt.
1 Press [CH 1], or [CH 2], or [CH 3], or [CH 4] to
begin playing back a stored message.
2 While the first message is still playing, press another
memory channel button ([CH 1], or [CH 2], or
[CH 3], or [CH 4]) to queue the next message.
For example, “AP 1 2 3 - -” appears while
Messages #1, #2, and #3 are queued to play.
The same memory that was played back in
Step 1 may be queued in this step.
•To interrupt playback, press [CLR].
•To toggle the Repeat function ON or OFF, access
Menu No. 39 (REPEAT). The default is OFF.
ALTERING INTER-MESSAGE INTERVAL
The inter-message interval refers to the time period
between each message, if only one message is played
back, or between series of messages, if more than one
message is played back.
Example 1:
Ch. 2 \ Interval \ Ch. 2 \ Interval \ ...
Example 2:
Ch. 3 \ Ch. 2 \ Ch. 1 \ Ch. 4 \ Interval \
Ch. 3 \ Ch. 2 \ Ch. 1 \ Ch. 4 \ Interval \ ...
Select the time interval between playbacks via Menu
No. 40 (REP.TIME). The default interval is 5 seconds.
OFF
ON
Numeral
B
C
L
H
P
"Zero"
"One"
The numeral is announced.
"Two"
"Three"
"Four"
"Five"
"Six"
Displayed Announcement
1
1
VS-2 announces "B" when you switch from Menu
A to B via Menu No. 00 (MENU.A/B).
74


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TS-870S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TS-870S in the language / languages: English as an attachment in your email.

The manual is 2,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TS-870S

Kenwood TS-870S User Manual - Dutch - 102 pages

Kenwood TS-870S User Manual - French - 102 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info