606693
71
Zoom out
Zoom in
Previous page
1/104
Next page
65
BUTTON CONFIRMATION
This handy function audibly alerts you each time a
button is pressed. In most cases, a single beep is
emitted. However, when selecting an operating mode,
you have the choice of choosing via Menu No. 36
(BP. MODE) either a single beep or a Morse code
abbreviation for the mode selected. If Morse code is
chosen, then the abbreviation shown in the table for that
mode is sent.
ALARM NOTIFICATION
An alarm will automatically alert you any time that your
action requires the TS-870S to respond in a manner
that is outside its set of defined parameters. The alarm
may be configured for either three beeps or a Morse
code message via Menu No. 37 (WARN. BP).
The messages that you will hear include:
DISPLAY DIMMER
The Display illumination can be switched between two
levels. Menu No. 50 (DIMMER) selects either High (H)
or Low (L) intensity. The default is High (H).
11 OPERATOR CONVENIENCES
QUICK DATA TRANSFER
The TS-870S has the capability to quickly and
conveniently transfer the receive frequency, receive
mode (computer command “0B”), and the transceiver ID
(computer command “ID”) over to another compatible
transceiver. Compatible transceivers include:
TS-870S
TS-950SDX
TS-850S
TS-690S
TS-450S
This function could be useful while contesting. A
spotting station that is searching for new contest
multipliers can quickly transfer a frequency over to the
running (main) station. Even as a single operator, with
a little practice, you could use this Transfer function for
transferring frequencies from a spotting transceiver over
to your running transceiver. In this way, you get part of
the benefit of a multi-operator team while still operating
as a single-operator entry; an easy way to give a
significant boost to your score. The Transfer function is
fast, efficient, and increases your chances of working
multipliers that you might miss otherwise due to holding
a frequency by calling CQ.
Besides contest operation, the Transfer function can
also prove useful if you enjoy monitoring more than one
frequency simultaneously during day-to-day operating.
Even if monitoring another band, you can quickly
transfer any frequency over to your main transceiver
and be ready to make a call fast enough to beat the DX
packetcluster crowd.
SETTING UP
Equipment Needed
TS-870S transceiver
Compatible transceiver
Interconnecting cable
•IF-232C (only necessary if transferring data to a
transceiver other than the TS-870S)
The cable ends must be terminated with a 9-pin
RS-232C female connector to mate with the TS-870S
COM connector and a 6-pin DIN male connector to
mate with the ACC 1 connector on any of the other
transceivers. If using two TS-870S transceivers, then
both ends need a 9-pin RS-232C female connector.
The cable must also have the TXD/RXD and CTS/RTS
wires crossed respectively so the cable will act as a null
modem when connected between the transceivers.
If two TS-870S transceivers are connected together, the
same COM connector baud rate must be used on each
transceiver. If transferring to or from other KENWOOD
transceivers, select 4800 bps and 2 stop bits on the
TS-870S.
LSB
USB
CW
CW –R
FSK
FSK –R
AM
FM
. _ . . (L)
. . _ (U)
_ . _ . (C)
_ . _ . . _ . (CR)
. _ . (R)
. _ . . _ . (RR)
. _ (A)
. . _ . (F)
Morse Code Output
Mode
You attempted to start memory
scanning when it wasn't possible.
You attempted to use Quick Channel
Search to locate either a
programmed or a vacant memory
channel when it wasn't possible.
You accessed the Quick Menu and
attempted to change to a different
Menu No. when the Quick Menu was
not defined (there are no items in the
Quick Menu).
CHECK
OVER
Morse
Message
Reason
You attempted to directly enter a
frequency that is outside the allowable
range.
71


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TS-870S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TS-870S in the language / languages: English as an attachment in your email.

The manual is 2,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TS-870S

Kenwood TS-870S User Manual - Dutch - 102 pages

Kenwood TS-870S User Manual - French - 102 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info