606692
39
Zoom out
Zoom in
Previous page
1/96
Next page
31
COMMUNICATING AIDS 7
TRANSMISSION
VOX (VOICE-OPERATED TRANSMISSION)
VOX eliminates the necessity of manually switching
to the transmission mode each time you want to
transmit. The transceiver automatically switches to
transmission mode when VOX senses that you have
begun speaking into the microphone.
When using VOX, develop the habit of pausing
between thoughts to allow the transceiver to drop
back to reception mode briefl y. You will then hear if
anybody wants to interrupt, plus you will have a short
period to gather your thoughts before speaking again.
Your listeners will appreciate your consideration as
well as respect your more articulate conversation.
Press [VOX (LEV)] to toggle between VOX ON and
OFF.
• “ appears when the VOX function is ON.
Microphone Input Level
To enjoy the VOX function, take the time to
properly adjust the VOX gain. This level controls
the capability of VOX to detect the presence or
absence of your voice.
In CW mode, this level cannot be adjusted.
1 Select USB, LSB, FM, or AM mode.
2 Press [VOX (LEV)] to switch the VOX function
ON.
• “ appears.
3 Press and hold [VOX (LEV)].
The current VOX gain level appears on the
sub-display.
4 While speaking into the microphone using
your normal tone of voice, adjust the setting
(default is 4) using the MULTI/CH control until
the transceiver reliably switches to transmission
mode each time you speak.
The selectable gain range is from 0 to 9.
The setting should not allow background
noise to switch the transceiver to transmit
mode.
Note: The VOX gain level can be adjusted even if VOX is
switched OFF or while you are transmitting.
Delay Time
If the transceiver returns to reception mode too
quickly after you stop speaking, your fi nal word
may not be transmitted. To avoid this, select an
appropriate delay time that allows all of your words
to be transmitted without an overly long delay after
you stop speaking.
1 Select USB, LSB, FM, or AM mode.
2 Press [VOX (LEV)] to switch the VOX function ON.
• “
appears.
3 Press and hold [KEY (DELAY)].
The current setting appears on the
sub-display. The default is 50 (1500 ms).
4 While speaking into the microphone using your
normal tone of voice, turn the MULTI/CH control
such that the transceiver switches to reception
mode after you have stopped talking.
The selectable range is from 5 to 100
(150 ms to 3000 ms) in steps of 5, or OFF.
5 Press [CLR] to store the parameter and exit the
setting mode.
Anti-VOX Adjustment
The TS-590SG transceiver has a DSP IC to
improve and customize incoming/ outgoing audio
signals. When the VOX function is turned ON, the
DSP IC adjusts the Anti-VOX level automatically,
comparing the reception sound level and
microphone input level. So, you never have to
worry about adjusting the anti-VOX level.
Note: When connecting a headphone to the Phone jack,
Anti-VOX will not function.
Data VOX
Although the microphone is normally used for
VOX transmission, you can also utilize the audio
input of the ACC2 or USB connector. When the
transceiver detects an audio signal on the ACC2 or
USB connector, it automatically transmits. You can
select ACC2 or USB via Menu No. 69 (“Selecting a
Data Transmission Line”) {page 61}.
1 Select USB, LSB, FM, or AM mode.
2 Press [MENU], then press [Q-M.IN]/ [Q-MR] or
turn the MULTI/CH control to select Menu No.
76.
3 Press [M.IN] to set the VOX with DATA input
function ON.
4 If necessary, adjust the VOX gain level for the
ACC2 or USB connector {page 32}.
Note: While VOX with DATA input is set to ON (Menu No.
76), speaking into the microphone also activates the VOX
function and you can still transmit using Mic [PTT]. Anti-VOX
does not function with Data VOX.
While the Data VOX function remains ON and the transceiver
is connected to a sound source, such as a PC, the
transceiver may begin transmitting due to the sounds
emitted from the sound source. To avoid unintended
transmission while the transceiver is connected to the
sound source, turn the Data VOX function OFF.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TS-590SG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TS-590SG in the language / languages: English as an attachment in your email.

The manual is 4,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TS-590SG

Kenwood TS-590SG User Manual - German - 96 pages

Kenwood TS-590SG User Manual - Dutch - 96 pages

Kenwood TS-590SG User Manual - French - 96 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info