606707
60
Zoom out
Zoom in
Previous page
1/77
Next page
APRS-15
[STATE/SECTION/REGION]:
Use this method when the packet is being relayed within only a
limited area.
Packet paths are specifi ed using ABBR (abbreviations). (In
America, for example, CA represents California, AZ represents
Arizona, etc.)
1 Set the TYPE to [STATE/SECTION/REGION], then press
[USE].
2 Using the ABBR setting, enter an abbreviation of up to 5
characters.
3 Select the relay step number for the TOTAL HOPS setting.
You can confi rm the setting contents in PATH IS VIA.
[OTHERS]:
Use this method when the relay path is specifi ed to an individual.
When a character string is not entered, the packet data is not
relayed.
1 Set the TYPE to [OTHERS], then press [USE].
2 Enter a path.
A Packet path is the digipeat route of the packet data sent from
My station.
For example, if you want your packet to take the [W5DJY-1] >
[W4DJY-1] route, enter [W5DJY-1, W4DJY-1], separating each
digipeater callsign with a comma.
NETWORK
Enter Menu mode and access Menu 613.
Set APRS data communications UNPROTOCOL.
UNPROTOCOL is the method in which packet data is transmitted
without other stations or making a connection.
Select either [APRS(APK102)] or [ALTNET].
[APRS]: (Use this setting for normal use: default setting)
When transmitting messages and meteorological data using
the TM-D710G, “APK102” is added to the packet, following your
station callsign.
There are no restrictions on received packets.
[ALTNET]: When it is necessary to add restrictions to received
packets, you can set it for special use.
Select ALTNET and press [USE], then enter your desired
character string.
When transmitting messages and meteorological data using
the TM-D710G, the character string you entered is added to the
packet, following your station callsign.
When using ALTNET, enter ALTNET.
VOICE ALERT
Enter Menu mode and access Menu 614.
This function will notify another station as to whether or not they
are within communications range by emitting beacon tones.
When a Mobile Station is mobile with the Voice Alert function
turned ON, other stations also with Voice Alert turned ON
will hear the beacon sound of the Mobile Station if they have
matching tone (CTCSS) frequencies and are within range, thus
informing the stations that communications is possible.
You can set Voice Alert to [OFF], [ON] or [RX ONLY]. When using
this function, you can also change the tone frequency, press [F],
[T.SEL]. (The default is 100Hz.)
[OFF]: Voice Alert is disabled.
[ON]: A tone frequency is added to the transmitted packet. “VA”
appears above the displayed frequency.
[RX ONLY]: A tone frequency is not added to the transmitted
packet. “VAR” appears above the displayed frequency.
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TM-D710GA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TM-D710GA in the language / languages: English as an attachment in your email.

The manual is 7,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TM-D710GA

Kenwood TM-D710GA User Manual - English - 55 pages

Kenwood TM-D710GA User Manual - German - 74 pages

Kenwood TM-D710GA User Manual - Dutch - 75 pages

Kenwood TM-D710GA User Manual - Dutch - 55 pages

Kenwood TM-D710GA User Manual - French - 77 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info