606707
58
Zoom out
Zoom in
Previous page
1/77
Next page
APRS-13
APRS supports approximately 200 icons. It allows users to select
each icon by specifying a combination of two ASCII codes, for
example, ! and /. One is a symbol code, and the other is a table
identifi cation code (either /or \). If you select “OTHERS”, use the
following procedures:
1 Rotate the Tuning control to select a symbol code, then
press the Tuning control.
2 Rotate the Tuning control to select a table identifi cation code,
then press the Tuning control.
Overlay Icon Setting
For example, to set the Digipeater icon to the letter “S”,
select “OTHERS” under the icon type menu, select “#” under
“SYMBOL”, then select “S” under “TABLE”.
Note:
APRS icon codes (symbols/tables) are sometimes updated. Please refer to
the following offi cial APRS website (as of October 2013):
http://www.aprs.org/symbols/symbolsX.txt
http://aprs.org/symbols/symbols-new.txt
Set an icon that represents your operational status. (For example, setting
an Aircraft icon or Balloon icon to a fi xed station will cause confusion when
a station receives a beacon.)
SETTING BEACON TX ALGORITHM
Enter Menu mode and access Menu 611.
Packet Transmit Method <METHOD>
Select the operation method for transmitting APRS packets.
The table concludes how operations differ depending on the
selection.
[MANUAL]:
Each press of [BCON] transmits your APRS packet.
[PTT]:
1 Press [BCON] to switch the function ON.
“BCON” appears and blinks.
2 Press and hold the microphone [PTT], then speak into the
microphone.
3 Release the microphone [PTT].
Releasing the switch transmits your APRS packet.
You cannot retransmit an APRS packet unless the time
selected in <TX INTERVAL > passes. Wait until “BCON”
starts blinking to indicate transmitting is ready.
4 To switch the function OFF, press [BCON] again.
[AUTO]:
1 Press [BCON] to switch the function ON.
“BCON” appears.
Switching the function ON transmits your APRS packet once.
After that, APRS packets are automatically transmitted at
intervals of the period selected in <TX INTERVAL >.
2 To switch the function OFF, press [BCON] again.
[SmartBeaconing]:
1 Press [BCON] to switch the function ON.
“BCON” appears and blinks.
After manually transmitting your station position data 1 time,
your position data will be automatically transmitted using the
time interval set under “SmartBeaconing” <Menu No. 630
and 631>.
2 To switch the function OFF, press [BCON] again.
Note: After setting “SmartBeaconing”, the TX Interval Time, Decay
Algorithm and Proportional Pathing features will no longer operate.
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TM-D710GA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TM-D710GA in the language / languages: English as an attachment in your email.

The manual is 7,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TM-D710GA

Kenwood TM-D710GA User Manual - English - 55 pages

Kenwood TM-D710GA User Manual - German - 74 pages

Kenwood TM-D710GA User Manual - Dutch - 75 pages

Kenwood TM-D710GA User Manual - Dutch - 55 pages

Kenwood TM-D710GA User Manual - French - 77 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info