606707
36
Zoom out
Zoom in
Previous page
1/77
Next page
GPS – 3
TRACK LOG
All movement is saved in the GPS Logger (Internal GPS only).
Saved information includes latitude, longitude, altitude, travel
direction, speed, time, and date. The log can retain up to 5000
points of data.
Press [LOG] to turn the Track Log function On or Off.
When turning the Track Log function On, “LOG START” appears
for approximately 5 seconds, followed by the “
icon.
When turning the Track Log function Off, “LOG STOP” appears on
the display for approximately 5 seconds.
With the Track Log function On, even if the power source is turned
Off during a Log acquisition, the log is backed up so that when the
power is turned back on, the log acquisition resumes.
You can verify the Log activity ratio in the GPS pinpointing screen.
Note:
When the Track Log is turned On while the GPS is Off, the GPS will also
turn On.
When the GPS is not pinpointing, data is not saved to the log.
You can read the Track Log using the MCP-6A.
If the Track Log overwriting confi guration is turned Off (see below), “LOG
FULL appears when the log memory is full.
When the APRS is On, Log operation will begin only when the APRS menu
COM terminal input is Off.
Track Log All Clear
1 Press [ALLCLR].
“CLEAR ALL?” appears. Press the Tuning Control to clear all
Track Logs.
Overwriting the Track Log
When the Track Log becomes full, new data will begin
overwriting the oldest Track Log data.
1 Enter Menu mode and access Menu 502.
2 Select “ON” or “OFF”.
Selecting “ON” will allow old data to be overwritten with new
data.
LOG SETUP
Enter Menu mode and access Menu 503.
Record Method <RECORD METHOD>
You can set the conditions for saving Track information as
GPS Logger.
You can change the settings for travel speed, etc.
Select “TIME”, “DISTANCE”, or “BEACON” for the Record
Method.
Interval Time <INTERVAL>
Select an Interval time from 2 ~ 1800 seconds (in steps of 1
second).
The Interval setting is available only if the Record Method has
been set to “TIME”.
Distance <DISTANCE>
Select a Distance from 0.01 ~ 9.99 (in steps of 0.01).
The Distance setting is available only if the Record Method has
been set to “DISTANCE”.
The units used for Distance can be set to miles (mi), kilometers
(km), or nautical miles (nm).
Interval and Log Total Time:
Point
Qty
Interval time (seconds)
2 5 10 15 30 1800
5000
166.7 416.7 833.3 1250 2500
150000
(min)
2.8 6.9 13.9 20.8 41.7
2500
(hour)
Interval and Total Distance:
Point
Qty
Interval distance (km)
0.01 0.10 2.00 4.00 6.00 8.00 9.99
5000 50 500 10000 20000 30000 40000
49950
(km)
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TM-D710GA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TM-D710GA in the language / languages: English as an attachment in your email.

The manual is 7,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TM-D710GA

Kenwood TM-D710GA User Manual - English - 55 pages

Kenwood TM-D710GA User Manual - German - 74 pages

Kenwood TM-D710GA User Manual - Dutch - 75 pages

Kenwood TM-D710GA User Manual - Dutch - 55 pages

Kenwood TM-D710GA User Manual - French - 77 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info