606707

Kenwood TM-D710GA Manual

35
Zoom out
Zoom in
Previous page
1/77
Next page
GPS – 2
INTERNAL GPS FUNCTION ON/OFF
Press [GPS] to turn the Internal GPS receiver ON or OFF.
• When the Internal GPS receiver is ON, the “ ” indicator
appears on the display.
• When the Internal GPS receiver is On, the internal clock is
automatically confi gured with the time data from the internal GPS
receiver. When determining your position for the fi rst time after the
power supply is turned On, the clock data is automatically set and is
updated once per day thereafter.
•
You must set the time zone beforehand, through Menu No. 927.
When the Internal GPS receiver is On, pressing [POS] will
display “Latitude longitude, Time, Altitude, Travel direction,
Speed, Grid square locator, PTT frequency”. Press [] to cycle
the display between “Target point name, Target point distance,
Target direction” ➡ “Log meter” ➡ “GPS satellite information”.
• Press [] to return to the previous display.
<Latitude longitude, Time, Altitude, Travel direction, Speed,
Grid square locator, PTT frequency>
a: Speed b: Time c: Travel direction d: Latitude longitude
e: Altitude f: Grid square locator g: PTT frequency
<Target point name, Target point distance, Target direction,
PTT frequency>
a: Name b: Target point distance c: Target direction
d: PTT frequency
• While the target point is displayed, press [N/H] to toggle the display
between North up and Heading up. North Up displays North as the
top and Heading Up displays the current travel direction as the top. In
the Heading Up display, a “+” or “–” sign is used to help indicate the
target direction.
<Log meter>
<GPS satellite information>
a Sky view
b 2D: Latitude/Longitude positioning
3D: Latitude/Longitude and Altitude positioning
c Satellite signal-strength bars
The sky view shows the satellites you are receiving. The satellite
signal-strength bars indicate the strength of each satellite you
are receiving. A solid bar indicates that the GPS satellite is
ready for use.
• When only the frame of the signal-strength bar is displayed, no
contact with the satellite has yet been made.
Note:
◆ When GPS cannot be received, turn the power ON in a clear environment
(Open Sky).
◆ While the above screen is displayed (the GPS satellite information screen is
positioning) press [MARK] (1s) to register a Mark Waypoint.
GPS DATA SETUP (1)
Enter Menu mode and access Menu 500.
■ Land Survey System Datum <DATUM>
When using the Internal GPS receiver, set up the necessary
land surveying system.
For APRS, select “WGS-84” (world land surveying system).
• This function does not work when using an external GPS
receiver.
■ SBAS <SBAS>
Through the SBAS (Satellite Based Augmentation System)
geostationary satellite, when using a system which offers
information of wide scope reinforcement, set this function to
“ON”.
■ GPS Data PC Output <COM OUTPUT>
Turn this function on when you want to send the Internal GPS
receiver data (NMEA) from the PC terminal.
GPS DATA SETUP (2)
Enter Menu mode and access Menu 501.
■ Sentence <SENTENCE>
Adds an NMEA sentence to the Internal GPS receiver data
output from the PC.
Set the sentence to “$GPGGA”, “$GPGLL”, “$GPGSA”,
“$GPGSV”, “$GPRMC”, “$GPVTG”, or “$GPZDA”.
• With BEACON transmission, the “$GPGGA” and “$GPRMC”
check
( ) cannot be removed from necessary information and satellite
image information.
• You cannot output an NMEA sentence from an external GPS
receiver to a PC.
… 35 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TM-D710GA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TM-D710GA in the language / languages: English as an attachment in your email.

The manual is 7,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TM-D710GA

Kenwood TM-D710GA User Manual - English - 55 pages

Kenwood TM-D710GA User Manual - German - 74 pages

Kenwood TM-D710GA User Manual - Dutch - 75 pages

Kenwood TM-D710GA User Manual - Dutch - 55 pages

Kenwood TM-D710GA User Manual - French - 77 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info