511233

Kenwood TH-F7E Manual

30
Zoom out
Zoom in
Previous page
1/64
Next page
25
7 SCAN
CALL SCAN
A Call channel can be stored for each amateur radio
band, such as the 2 m, 70 cm, and 1.25 m (TH-F6A
only) bands {page 19}. You can monitor one of these
Call channels and the current operating frequency
alternatively.
1 Select the frequency (in VFO, Memory Recall, or
Information Channel mode) you want to monitor.
• In VFO mode, press [A/B] to select the A or
B-band. Then, turn the Tuning control or press
[ ]/ [ ] to select the desired frequency.
• In Memory Recall mode, turn the Tuning
control or press [ ]/ [ ] to select a memory
channel you want to monitor.
• Press [INFO] to recall the last Information
Channel you monitored.
2 Press [CALL] (1 s) to start the Call Scan.
3 The Call channel for the band and the selected
VFO frequency, memory channel or Information
Channel are monitored alternately.
4 To stop the Call Scan, press [PTT] or [CALL].
Note:
◆
The transceiver stops scanning in all modes when it detects a
signal.
◆
You can perform the Call Scan even if the recalled memory
channel or Information channel has been locked out {page 27}.
◆
If the Call channel is not available for the current operating
frequency, an error beep sounds.
PRIORITY SCAN
You may sometimes want to check your favorite
frequency activities while monitoring the A and
B-bands. In this case, use the Priority Scan function.
It checks the activities of Pr1 and Pr2 channels every
3 seconds, alternately, using the B-band receiver.
If the transceiver detects a signal on Pr1 or Pr2, it
recalls the frequency to the B-band receiver.
Note: If you do not operate any control or key for 3 seconds after the
signal drops, the transceiver returns to the original frequency and
resumes Priority Scan.
PROGRAMMING PRIORITY CHANNELS
1 Press [VFO].
2 Turn the Tuning control or press [ ]/ [ ] to select
your desired priority channel frequency.
3 Select the mode and selective call functions, if
necessary.
4 Press [F].
• The memory channel number appears.
5 Turn the Tuning control or press [ ]/ [ ] to select
“Pr1”.
6 Press [MR] ([ ] or [MNU]) to store the data on the
priority channel.
• If you want to store a second priority channel,
repeat steps 1 ~ 6 and select “Pr2” in step 5.
Note: You can program any frequency available on the B-band as a
priority channel.
USING PRIORITY SCAN
1 Press [F], [BAL].
•“” appears.
• The transceiver checks for a signal on the Pr1
and Pr2 channels every 3 seconds, alternately.
• When the transceiver detects a signal on the
priority channel, “Pr1” or “Pr2” blinks and the
B-band frequency changes to the priority
channel.
• If you do not operate any control or key for
3 seconds after the signal drops, the
transceiver returns to the original frequency
and resumes Priority Scan.
2 To quit Priority Scan, press [F], [BAL] again.
… 30 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TH-F7E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TH-F7E in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TH-F7E

Kenwood TH-F7E User Manual - Dutch - 64 pages

Kenwood TH-F7E User Manual - French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info