617939
7
Zoom out
Zoom in
Previous page
1/14
Next page
O
uP/DowN TUNTNG buttons
Auto
tuning mode
-
When the
UP
or DOWN button
is
pressed,
the frequency
automatically
increases
or
decreases
until
the next station of sufficient signal
strength is reached.
Manual
tuning
mode
-
Each time the UP or
DOWN
button is
pressed,
the tuned frequency
increases
or
decreases in the following manner.
FM
-
50 kHz steps
AM-9kHzsteps
lf
either button
is held down more than half a second, the
tuned
frequency
will continue to increase or decrease un-
til
the button is released.
(D
rurunue MoDE
buttons
AUTO/MANUAI
button
-
Each
press
alternates auto
tuning
and
manual tuning modes.
DIRECT
button
-
Press this
button
while listening to
a
radio
broadcast to set the unit to the direct tuning
mode
so
that the frequency the desired station can be
entered with the numeric buttons.
(D
PRESET
FUNcnoN bunon
Used to
select A or B setting for the
preset
channel button. ln
either FM
or
AM mode, 20
stations can be
preset
as random
as each
setting
{A
or
B)
can contain
10
preset
stations.
ln-
dicator A lights when A setting is
used, and
indicator B lights
when
B
setting
is
used.
(D
DIRECT
ACCESS TUNING/PRESET
(numericl
buttons
Use these buttons to:
1)
input
directly the digits of frequencies, or
2l
store
and recall frequencies
in
the
preset
memory.
-
The
controls and switches
(D
equalizer
section.
-
(D
"ta
for
graphic
(D
eoueuzER
PRESET MEMoRY
bunon
Press
this
button to store equalizer curves
in memory. When
this
button is
pressed
with
the display
window in
graphic
equalizer mode.
the
MEMORY indicator lights
and
the
"<"
on
the
sides
of the display
window's
displays
1 to
3
flash, in-
dicating that memory operation is
possible.
During
this
condition,
which lasts Íor approx. 5 seconds.
pressing
one EOUALIZEB PRESET buttons
1
to 3 stores the
current
equalizer curve in the memory of the button
pressed.
(D
eoult-lzER
PRESET buttons
Use these
buttons to store equalizer curves
in memory
or to
recall them.
(Three
different equalizer curves can be stored.)
ln
either
case, when the display
window
mode
has
been set
for
"
the music spectrum analyzer display"
,
the
graphic
equalizer display
is
displayed for approx. 5 seconds,
then
the
display
reverts to
the
previous
spectrum
analyzer
display.
O
A
LoUDNESS
bufton
Press
this
button
to recall the
preset
(Íixed)
equalizer curve
(We
call
this LOUDNESS curve).
(D
a
pneseNCE
button
Press
this
button to
recall
the
preset
(Íixed)
equalizer curve
(We
call
this PRESENCE curve).
(D
EOUAUZER switch
Turn
this
switch
to ON and the frequency characteristic will
be
modiÍied
by
passing
through the
graphic
equalizer. ln the
DEFEAT,
position.
the
frequency
characteristic
remains
un-
changed.
The DEFEAT
indicator in the display window lights when the
switch
is
set
to DEFEAT.
@
REMOTE SENSOR
Point the supplied
remote
control unit
towards this sensor
and
operate.
@
PowER srAND
BY indicator
Lights when the
MAIN POWER
switch
is set to ON.
@
BAIÁNCE controls
Governs
the amount
of sound coming from each
paired
speakers
to
get
optimum
stereo
effect.
Pressing the RIGHT button will decrease the left channel
volume and
pressing
the LEFT button will decrease the right
channel
volume. When the BALANCE controls
is
pressed,
display
window shows the BALANCE
indicator.
(p
MUTTNG bunon
When the
muting
button
is
pressed.
the MUTING indicator in
the display window
will Ílash,
and
the overall listening
sound
level
is reduced
by
20 dB.
When the button
is
pressed
again,
you
can
restore
exactly the
same
listening
level
as before.
(D
volume
conrÍots
This
control adjusts
the left- and right-channel volumes
simultaneously.
Set it for the deslred
listening
level. Pressing
the
up
(A)
button
increases the volume and
pressing
the
down
(V)
button decreases
it.
Note:
A slight
noise is heard from the
speakers
when operating the
VOLUME controls. This
noise is
the built-in microprocessor control
signal and
is not
a
fault.
(D
vPeO
switch
To
play
a video recorder connected to the
VCR A
jacks,
set
the switch to A. To
play
back a video
recorder
connected to
the VCR B
jacks,
set the switch to
B.
@
SYNTHETIC STEREO SWitCh
Press this switch
to
give
the
pseudo
stereo effect to the
monaural source connected to the VCR A and B
jacks.
@
NPUT
sELEcroR
buttons
PHONO
-
Selects the
program
source
played
on the
turntable.
TUNER
-
Selects the tuner
mode.
CD/AUX
-
Selects
the
source connected
to the CD/AUX
jacks.
VIDEO
-
Selects the
video recorders
connected
to the
VCR
jacks. (Use
the VIDEO
switch
Íor
selection
between
the
VCR A
jacks
and VCR B
jacks.)
TAPE 1
-
Press this button to
play
back a
tape
deck
connected to TAPE
1
jacks.
TAPE
2
-
Press this button
to
play
back a
tape
deck
connected
to the TAPE 2
jacks.
(The
TAPE-2 switch is
operated
in
priority
to any
other
audio input systems.)
KVR-A7OR
(E}
7
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood KVR-A7O at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood KVR-A7O in the language / languages: English as an attachment in your email.

The manual is 18,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info