617939
9
Zoom out
Zoom in
Previous page
1/14
Next page
Operating
instructions
Listening
to AM/FM broadcasts
First
set the MAIN POWER
switch
to
ON,
then the REMOTE
POWER
switch to ON. Press the TUNER
button of
the INPUT
SELECTOR:
"TUNER"
and digital display
are
displayed in
the
display
window. Next
press
the FM or AM button of the BAND
SELECTOR.
When FM is
pressed,
select
also
MONO
or
AUTO
of the
FM MODE buttons.
Auto
tuning
1. Press
the AUTO/MANUAL
button
to
set
to
"AUTO".
2. Press
the
UP
or DOWN TUNING button: The Írequency will
automatically
increase or decrease until
a
station with
suÍ-
ficient
signal level is
received.
To stop the frequency scan-
ning
before a station is received,
press
the
AUTO/MANUAL
button to set to
"MANUAL".
3. Adjust
the VOLUME controls as
preferred.
Manual
tuning
1. Press
the AUTO/MANUAL
button
to
set
to
"MANUAL".
2. Press
the
UP/DOWN
TUNING
buttons
to tune in
the
desired
station.
To
continuously increase
or
decrease Írequencies, hold
the
button depressed.
3. Adjust
the VOLUME controls for
your preference.
Direct
tuning
1. Press
the DIRECT button.
2. Enter
the desired frequency using the numeric keys.
3. Adjust
the VOLUME controls for
your preÍerence.
Presetting
broadcast stations
A total
20 AM and FM stations
can be
preset.
1 .
Select
the desired station with
either auto
tuning, manual
tuning
or direct tuning.
Press
the TUNING MEMORY
button.
(The
MEMORY in-
dicator
flashes.
)
Press
the PRESET FUNCTION
button
to select
"A"
or
"8".
4. Press
one the numeric keys: The frequency being tuned
in is
stored in the
memory
the digit key.
1. lf
the Írequency
which
is received
by direct tuning method is out
of the
receivable range, the Írequency
display
flashes
and
preset-
ting is
not
possible.
2. When
the channel spaces of FM and AM are 50 kHz and 9 kHz
respectively,
presetting
the Írequency in
other
than
50
kHz
and
I kHz
steps stores the stations of the nearest lower 50 kHz
and
I
kHz
step
frequencies.
Example
(FM)
98.54 MHz
-
98.50 MHz
98.57 MHz
-
98.55 MHz
(AM)
533 kHz
-
531 kHz
1000
kHz
-
999
kHz
Listening
to
a
pres€t
station
1 . Press
the TUNER button of the INPUT SELECTOR.
2.
Press
the PRESET
FUNCTION
button
to select
"A"
or
"8".
3.
Press
a numeric key under whích memory has been
preset.
4.
Adjust
the VOLUME controls
as
preferred.
Record
playing
1. Press
the PHONO INPUT SELECTOR button.
2. Operate
the turntable to
play
back a
record.
3. Adjust
the VOLUME controls Íor
your preference.
2.
Listening to the
progÍam
source connected to
the CD/AUX
jacks
1. Press
the
CD/AUX
INPUT
SELECTOR button.
2.
Operbte
the
component
connected to the
CD/AUX
jacks.
3. Adjust
the VOLUME controls Íor
your preÍerence.
Tape decks
Tape
playback
1 . Press the appropriate
TAPE
INPUT SELECïOR button
(1
or
2) to select output
from
a tape deck connected to the
TAPE
1or2
jacks.
2. Operate the tape deck.
3.
Ad
Note:
just
the VOLUME controls to
your preference.
When
both buttons
(IAPE-1
and TAPE-2)
are
pressed,
TAPE-2
set-
ting has
priority.
Recording
1 . Press
the
appropriate
INPUï
SELECTOR buttons.
2. Set up
your
tape deck(s) for recording and set the recor-
ding
level
with the controls on
your
tape deck(s).
3. Adjust listening level at the unit to suit
your
listening
preference.
Tape
dubbing
Tape recordings may be duplicated
(dubbed)
easily using two
tape
decks
connected to the TAPE 1 and 2
jacks.
Tape
dubb-
ing is
possible
from the tape
deck connected
to the TAPE
1
jacks
to deck
connected
to the TAPE 2
jacks.
1. Connect two tape decks to the TAPE 1
and
TAPE 2
jacks.
2. Press the TAPE 1 INPUT SELECTOR button.
3. Play back the recorded tape and adjust the recording levels
before starting tape dubbing.
Note:
Adjust record levels on the deck that is makiíg
the copy using that
deck's operating controls.
Listening
to
video recordeÍ
audio sound
1 . Press the VIDEO button of the INPUT SELECTOR.
2. Press the VIDEO
button to select wither of the outputs
from video recorders
connected to the VCR A and VCR B
jacks.
3. Operate
the video recorder.
4. Adjust the VOLUME controls Íor
your
preference.
5. When a video monitor is connected to the MONITOR
OUT
jack
on the rear
panel,
the
picture
from
the recorder
cbn
also be monitored.
Note:
When
connecting a
monaural video recorder, connecl it to the
VCR A
jack
and set the MoNo/sTEREo switch ro
"MoNo".
KVR.ATOR
(E)
9
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood KVR-A7O at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood KVR-A7O in the language / languages: English as an attachment in your email.

The manual is 18,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info