617939
6
Zoom out
Zoom in
Previous page
1/14
Next page
Gontrols,
indicators
and connectors
o
neuore PowER
switch
By
pressing
this
switch
with the MAIN POWER switch set to
ON,
the
power
the unit and the
power
of the equipment
connected
to the SWITCHED
AC
outlet can be switched
ON/OFF.
When this
switch is
pressed,
the function selected
last
or the
last station
to
be
received
will
be displayed. You can operate
the switch
from a distance
with
the
RC-90
(remote
control
unit).
o
MAN
POWER
switch
Press
this switch
to
turn
on
main
power.
(The
POWER STAND
BY
O
inOicator
lights.) Press it again to turn
main
power
ofÍ.
o
SPEAKERS
switch
A, B
OFF
-
This
position
silences all speakers
to
permit
private
use of headphones.
A ON
-
Activates speakers connected to the SPEAKERS
A
terminals
on the rear
panel.
B ON
-
Activates speakers connected to
the
SPEAKERS
B
terminals
on
the rear
panel.
A, B
ON
-
Activates speakers connected to
the
SPEAKERS
A and B terminals simultaneously.
()
PHoNES
iack
Stereo headphones
are
plugged
into this
jack.
-
Tho
controls and switches
@
-
@
are
for
graphic
equalizer
soction.
-
O
FREoUENGY
BAND sELEcroR buttons
Use
these
buttons
to select frequency bands
when setting
equalizer levels.
When
one of these seven buttons
is
pressed.
the display
changes
to
graphic
equalizer
display, with the
frequency
display
corresponding
to the Írequency band selected
flashing,
and equalizer
level control
is
possible.
O
EouALlzER
LEVEL
controls
WhEN ONC thE
FREOUENCY
BAND SELECTOR bUttONS iS
pressed
and the
frequency
band display corresponding to the
button
pressed
is flashing, these controls can be
used
to set
the equalizer
level.
(The
level
can be varied
in 13
stages. in 2
dB steps, between
MAX +12
dB and
MIN
-12
dB.) The
same
operation is
possible
for
any
frequency
band of the
FRE-
OUENCY
BAND
SELECTOR.
-
The contÍols and
switches
O
-
(@
are for
tuner
soction.
-
O
BAND sELEcroR butrons
FM
-
For FM
broadcasts
(The
FM indicator lights.)
AM
-
For AM broadcasts
(The
AM indicator lights.)
G)
FM MoDE bunon
(II)
AUTO
-
The
unit switches automatically between
stereo and
monaural
operation
in
accordance with the
manner in which the
selected station
is
operating.
ln
ad-
dition,
noise is
silenced as
you
tune
between stations.
(:l
MONO
-
Provides monaural operation regardless
of the manner of transmission.
€)
rurunc MEMoRY button
When the input mode
is in
tuner
mode,
use this button
to
store new
frequencies in
the
preset
channel
memory. By
pressing
the TUNING MEMOBY
button, setting
the PRESET
FUNCTION button to
A
or
B
and by
pressing
one
the
PRESET channel buttons,
the Írequency being receíved is
stored
in the memory in the PRESET
channel button
pressed.
(E
PRESET scAN button
Use this button
for
preset
channel scanning.
When
a
frequency stored
in
the
preset
memory
is
being
received.
pressing
this button shifts the
reception
to
the next
frequency stored in the
preset
memory.
(The
preset
channels
are scanned
in the orderA-0,
A-1, ..
,
B-0, B-1, ..., B-9.)
When
frequencies other than those stored in the
preset
memory
received.
pressing
this button changes the
reception
to the
frequency in
preset
channel A-0.
6
rvn-a;on
ret
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood KVR-A7O at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood KVR-A7O in the language / languages: English as an attachment in your email.

The manual is 18,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info