795404

Kenwood CR-ST100S Manual

53
Zoom out
Zoom in
Previous page
1/160
Next page
21
14.6 Save:
Once you have made all the settings, please press the <OK> button to save the settings.
An activated alarm clock is shown with an alarm symbol and the number of the active alarm clock at
the bottom left of the display. In standby mode you can also see the set alarm time.
14.7 Switching off the alarm clock after waking up
To switch off the alarm clock until the next alarm cycle, please press the <Standby> button on the
device or on the remote control “Alarm off” appears briey on the display. If you only want to inter-
rupt the alarm function for a few minutes (snooze), you can use any other button. The alarm delay
is set by pressing a button in steps 5, 10, 15 and 30 minutes and can also be extended again and
again. After a short time, the radio automatically switches back to “Standby” and the time remai-
ning until waking up again is displayed next to the ashing alarm symbol.
Note: The saved wake-up times are retained in the event of a power failure.
15. System settings
In the system settings you can change the settings of the radio and call up important information
about it.
15.1 Equalizer
With the equalizer you can adjust the sound of the radio to your liking. You can choose from precon-
gured settings or create your own prole. Please proceed as follows:
Press the <MENU>, button and select "System Settings" and then "Equalizer”. You can select
a sound prole with the <UP> or <DOWN> buttons and then conrm with <OK>. The following
proles are available:
Normal / Flat / Jazz / Rock / Movie / Classic / Pop / News / My EQ
Setting up “My EQ”:
To do this, please navigate to "My EQ profile setup" and conrm with <OK>. The“Bass” and "Tre-
ble" can now be set in the following menu. Conrm the "Bass" or "Treble" with the <OK> button,
make the appropriate settings with the <LEFT> or <RIGHT> buttons and conrm with the <OK>
button. Alternatively, these settings can also be made with the <NAVIGATE> knob. The active sound
prole is marked with "*".
… 53 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood CR-ST100S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood CR-ST100S in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1.47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info