795404

Kenwood CR-ST100S Manual

52
Zoom out
Zoom in
Previous page
1/160
Next page
20
13. Sleep timer
With this function you can switch the radio to standby mode automatically after a set period of time.
You can choose between 15, 30, 45 or 60 minutes, "Sleep OFF" deletes the previously set period
of time. To do this, press the <MENU> button while the audio source is selected and select "Main
menu". Use the <UP> or <DOWN> to navigate in the menu and select "Snooze". Use the <UP> or
<DOWN> button in the"Set snooze time" menu to select the desired time period and conrm with
the <OK> button. Exit the menus again with the <MENU> button. Alternatively, you can use the
<ZZZ> button on the remote control to set the time period.
The remaining time is shown in the bottom left of the display, with minutes running backwards.
14. Alarm clock
This radio has 2 individually adjustable alarm times. Press the <ALARM> button on the remote cont-
rol and select"Alarm 1" or "Alarm 2" to make the settings.
Alternatively, you can also call up the alarm clock from the main menu. In addition, a setting on the
radio is possible using the <ALARM> button and the <NAVIGATE> knob. In standby mode, the
saved alarm clocks of the <ALARM> button can be activated and deactivated. The following options
are available for programming the alarm clock:
14.1 Enable:
Select here on which days the alarm should be activated. The following selection is available:
Off/Daily/Once/Weekend/Weekdays
Select “Off”to deactivate an activated alarm clock.
14.2 Time:
Set the hours rst with the <UP> or <DOWN> buttons and then the minutes after pressing the
<OK> .
14.3 Mode:
Here you set the audio source with which you want to wake up. The following selection is available:
Buzzer / Internet radio / DAB / FM
14.4 Preset:
The station with which to wake up is specied here. The station last listened to or the stations saved
in the favourites are available here. Does not apply to buzzer mode.
14.5 Volume:
Set the desired alarm volume here.
… 52 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood CR-ST100S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood CR-ST100S in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1.47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info