795404

Kenwood CR-ST100S Manual

55
Zoom out
Zoom in
Previous page
1/160
Next page
23
15.2.6 Skip WPS/Setup using PSK (pre-shared key)
Select "Skip WPS" to establish the connection using the network key. In the case of networks wit-
hout WPS support, you can go directly to the input mask. Now enter the key and conrm it with the
"OK" button. If the entry is correct, the radio connects to your network and establishes an Internet
connection.
15.2.7 Open connection
We recommend that you do not connect to an open network. If the network you have selected is not
encrypted, you can conrm this with the <OK> button. Then the internet connection is established.
15.2.8 Manual network connection setup
If DHCP is active, please proceed as follows:
Please select the menus "Network" -> "Manual settings" -> "Wireless" -> "DHCP enable". Then
enter the full SSID (network name) and conrm it with the "OK" button. Now choose the appropriate
encryption method.
Please refer to the conguration of the router or AP. Depending on the method selected, the network
key is now entered and conrmed with the "OK" button.
15.2.9 If DHCP is inactive, please proceed as follows:
Please select the menus "Network" -> "Manual settings" -> "Wireless" -> "DHCP disable". Now
enter the information for "IP address", "Subnet mask", "Gateway address", "Primary DNS" and
"Secondary DNS". The values can be set using the <UP> or <DOWN> on the remote control or
the <NAVIGATE> knob. Use the <OK>, <LEFT> or <RIGHT> to select the individual number. Then
proceed as described under "DHCP active".
15.3 Show network settings
In this menu you will nd all settings of the network prole currently in use. To do this, select the
"View settings" menu in the "Network" menu. The values can be displayed using the <UP> or
<DOWN> on the remote control or the <NAVIGATE> knob.
15.4 NetRemote PIN setup
In this menu you can set a 4-digit PIN that will be requested when the UNDOK App is set up for the
rst time (see Chapter 24). The default is “1234”. The PIN should be changed immediately.
… 55 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood CR-ST100S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood CR-ST100S in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1.47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info