686369
49
Zoom out
Zoom in
Previous page
1/66
Next page
49
A7 MIG Welder© Kemppi Oy 2018 1804
INTEGRATION GUIDE
6.2.25 ToleranceError
This signal function is a common indicator for the tolerance
status signals CurrentOk and WFSpeedOk. If one of the
values is outside its tolerances, this signal is set (1).
0 = Values within tolerances
1 = At least one of the values outside the
tolerances
This function is not implemented in the A7 MIG Welder.
The status is always OK (0).
6.2.26 WireStuck
This signal function indicates whether the wire is stuck in
the weld.
0 = Wire is OK.
1 = Wire is stuck.
This function is not implemented in the A7 MIG Welder.
The status is always OK (0).
6.2.27 GateDoorOpen
This signal function indicates whether the gate door is
open or closed. Opening the gate door always causes an
error (Error 134: Gate door open) in the welding system.
Some functions, such as the touch sensor and the wire
feed, can still be used.
0 = Gate door closed (OK)
1 = Gate door open (error)
6.2.28 DigitalInput1 – DigitalInput8
These eight signal functions indicate the status of the
digital inputs in an external I/O device.
0 = Input is inactive
1 = Input is active
6.2.29 PanelLocked
This signal function is deprecated. The status is always 0
(not locked).
6.2.30 LocalRemote
This signal function is deprecated. The status is always 1
(local).
6.2.31 AutoManual
This signal function is deprecated. The status is always 0
(manual).
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kemppi A7 MIG Welder 350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kemppi A7 MIG Welder 350 in the language / languages: English as an attachment in your email.

The manual is 5,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info