686368

Kemppi A7 MIG Power Source 450 Manual

28
Zoom out
Zoom in
Previous page
1/67
Next page
28
A7 MIG Welder© Kemppi Oy 2018 1824
OPERATING MANUAL
13/15 Network settings * Congure web user interface server's network settings. The server is located in the robot interface unit
of the A7 MIG Welder.
DHCP enabled ON, OFF ON Switch the DHCP (dynamic host conguration protocol) client on for automatic IP settings or o for
manual (xed) settings.
IP address 0.0.0.0 - 255.255.255.254 0.0.0.0 View the current IP address when teh DHCP is on, or specify the IP address manually when the DHCP is
o.
Subnet mask 0.0.0.0 - 255.255.255.254 0.0.0.0 View the current subnet mask when the DHCP is on, or specify the subnet mask manually when the
DHCP is o.
Gateway 0.0.0.0 - 255.255.255.254 0.0.0.0 View the current gateway when the DHCP is on. The web user interface does not use the gateway
address, so it is not necessary to set up this value when the DHCP is o.
14/15 Gas sensor menu * Congure gas sensor located in the A7 MIG Wire Feeder (integrated version).
Enabled ON, OFF OFF Set the gas ow sensor on and o.
Level 5.0 - 20.0 l/min 5.0 l/min Set the gas ow detection level.
Gas type Unknown, CO2, Argon,
AR18CO2
Unknown Select the shielding gas type used for welding. This selection aects the correctness of the gas ow
measurement.
15/15 System name View the system name. The system can be named in the web user interface for identication purposes.
* For more information, see the A7 MIG Welder Integration guide.
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kemppi A7 MIG Power Source 450 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kemppi A7 MIG Power Source 450 in the language / languages: English as an attachment in your email.

The manual is 3,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info