686368
25
Zoom out
Zoom in
Previous page
1/67
Next page
25
A7 MIG Welder© Kemppi Oy 2018 1824
OPERATING MANUAL
4.2.6 System tests
Test menu (Main menu 7/8)
Menu item Value range Factory value Description
1/4 Wire inch Run the wire inch test by
pressing the START soft
button and keeping it
pressed. The ller wire
is driven forward by
accelerating to the selected
speed. The test stops when
the button is released.
Speed 0.5 - 25.0 m/min 5.0 m/min Select the wire feed speed in
0.05 m/min steps from 0.5 to
5.0 m/min and in 0.1 m/min
steps above 5.0 m/min.
WF motor Displays the motor current
during the test.
2/4 Wire retract Run the wire retract test
by pressing the START
soft button and keeping
it pressed. The ller wire
is driven backwards by
accelerating to the selected
speed. The test is stopped
when the button is released.
Speed 0.5 - 25.0 m/min 5.0 m/min Set the wire feed speed in
0.05 m/min steps from 0.5 to
5.0 m/min and in 0.1 m/min
steps above 5.0 m/min.
WF motor Displays the motor current
during the test.
3/4 Gas test Run the gas test by pressing
the START soft button once.
The test is run until the test
time goes o or until the
STOP soft button is pressed
(appears in the place of the
START button).
Test time 1 - 60 s 20 s Set how long the gas test is
run for.
4/4 Air blow Run the compressed air blow
test by pressing the START
soft button once. The test is
run until the test time goes
o or until the STOP soft
button is pressed (appears
in the place of the START
button).
Test time 1 - 60 s 20 s Set how long the air blow test
is run for.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kemppi A7 MIG Power Source 450 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kemppi A7 MIG Power Source 450 in the language / languages: English as an attachment in your email.

The manual is 3,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info