686368

Kemppi A7 MIG Power Source 450 Manual

24
Zoom out
Zoom in
Previous page
1/67
Next page
24
A7 MIG Welder© Kemppi Oy 2018 1824
OPERATING MANUAL
18/22 Gas guard * ON, OFF OFF Set the gas guard on and o.
Using this feature requires
the gas guard to be installed
into the wire feeder.
This setting does not aect
the gas sensor in the A7 MIG
Wire Feeder.
19/22 ArcVoltage ON, OFF OFF Set the arc voltage
measurement and
calculation function on
and o. When on, the arc
voltage, current and power
are displayed on the setup
panel and web user interface
during welding.
20/22 SubFeederLength * 10 - 25 m 10 m Set the length of the
subfeeder for arc voltage
calculation.
21/22 Gas sensor menu Congure the gas sensor in
the the A7 MIG Wire Feeder
(bus-controlled version).
Enabled ON, OFF OFF Set gas sensor unit on and
o.
Level 5.0 – 20.0 l/min 10.0 l/min Set gas ow detection level.
Gas mixture menu
Ar (0 – 100 %) (100 %) Amount of Argon (Ar) in the
mixture. This value cannot be
adjusted manually. The value
is automatically decreased
when the amount of other
gases is increased, and vice
versa.
CO2 0 – 100 % 0 % Set the amount of Carbon
Dioxide (CO2) in the mixture.
N2 0 – 100 % 0 % Set the amount of Nitrogen
(N2) in the mixture.
O2 0 – 100 % 0 % Set the amount of Oxygen
(O2) in the mixture.
H2 0 – 100 % 0 % Set the amount of Hydrogen
(H2) in the mixture.
He 0 – 100 % 0 % Set the amount of Helium
(He) in the mixture.
22/22 Keylock ON, OFF OFF Enable or disable the Key
Lock feature in Setup Panel.
When enabled, this feature
prevents unintentional
key presses. To lock or
unlock the keys, press F2
for 4 seconds. The keys are
locked automatically after 2
minutes, if the Setup Panel is
not used.
* This setting applies only to manual welding.
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kemppi A7 MIG Power Source 450 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kemppi A7 MIG Power Source 450 in the language / languages: English as an attachment in your email.

The manual is 3,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info