686364
12
Zoom out
Zoom in
Previous page
1/19
Next page
12
A7 MIG Gun 500-g© Kemppi Oy 2017 1712
OPERATING MANUAL
11.4 Connecting the control line
The control line is normally delivered with a pre-soldered amphenol plug, which is
compatible with the Kemppi wire feeder. Otherwise, choose a compatible plug for your
wire feeder and solder it to the corresponding wires in accordance with the assignment
plan.
Figure 7: Connecting the control line
The color codes are:
a = green
b = white
c = brown
d = yellow (insulated)
e = gray (insulated)
f = blue (insulated)
g = pink (insulated)
h = black
i = purple
j = red (insulated)
11.5 Setting the shielding gas quantity
This section describes how to set the shielding gas quantity.
The type and quantity of the shielding gas depend on the welding task and the gas
nozzle geometry.
To prevent the shielding gas supply from becoming clogged by impurities, the cylinder
valve must be opened briey, before connection of the cylinder. This will blow out any
impurities that may be present.
Make all shielding gas connections gas-tight.
Proceed as follows:
1. Connect the shielding gas cylinder to the wire feeding system.
2. Set the gas quantity on the pressure reducer of the shielding gas cylinder.
11.6 Introducing the wire
This section describes how to introduce the wire.
Each time you change the wire, make sure that the beginning of the wire is burr-free.
Proceed as follows:
1. Insert the wire in the wire feed unit as specied by the manufacturer.
2. Press the “Current-less wire feed” button at the wire feed unit.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kemppi A7 MIG gun - 500g at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kemppi A7 MIG gun - 500g in the language / languages: English as an attachment in your email.

The manual is 0,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info