686364
11
Zoom out
Zoom in
Previous page
1/19
Next page
11
A7 MIG Gun 500-g© Kemppi Oy 2017 1712
OPERATING MANUAL
11.2 Connecting the hose assembly to the gun
This section describes how to assemble the A7 MIG Gun 500-g neck.
Figure 6: Connecting the hose assembly to the gun
1 2
3
4
7 68
5
1. Connection module
2. EMERGENCY STOP cable
3. Control line
4. Air-blast hose
5. Central plug connection
6. Hose assembly
7. Robot mount
Proceed as follows:
8. Select the proper wire type and the corresponding wire guide. See Section 12.3
for details on cutting the wire to size and on correct mounting.
Wire liners for steel and stainless steels
PA liners for aluminum, copper, nickel, and stainless steels 5. Joining the
hose assembly with the gun
9. Lay the hose assembly (7) straight, and attach it to the connection module (1) on
the gun neck side.
10. Slide the ready-to-use wire guide from the central plug (5) up to the stop in the
changeable body, and screw it down by using the connection nut (6).
If required, connect the EMERGENCY STOP cable (2) of the robot mount (8) to the hose
assembly (7). See Section 11.4.
11.3 Mounting the wire feeder side connection
This section describes how to mount the wire feeder side connection. See Section 11.2.
Proceed as follows:
1. Check that the wire guide has been fastened in place correctly.
2. Join the central plug (5) and the central socket at the wire feed unit, and secure them
with a connection nut (6).
3. Fasten the air-blast hose (4) to the air-blast and spraying unit or the air-blast valve.
Seal the connection gas-tight if the “Cleaning with compressed air” option will not be
in use.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kemppi A7 MIG gun - 500g at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kemppi A7 MIG gun - 500g in the language / languages: English as an attachment in your email.

The manual is 0,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info