738040
11
Zoom out
Zoom in
Previous page
1/20
Next page
M7i WHEELCHAIR-ACCESSIBLE TOTAL BODY TRAINER
11
Move the Resistance Lever to the most forward position to engage
the Emergency Brake. This will stop the motion of the Flywheel
within one revolution, refer to Figure 8. Wait until the Footpads and
Handles come to a complete stop before dismounting.
Resistance is controlled by the Resistance Lever, refer to Figure 8.
The Resistance Lever can be set to any gear from 1 to 24. The higher
the gear number setting, the greater the resistance for the user.
RESISTANCE LEVER
EMERGENCY BRAKE
LEVELER FOOT
The M7i should be placed on a level surface. If the sub-oor is not
level, the Leveler Foot allows adjustment to a position that will
level your M7i.
Adjust the Leveler Foot by slightly lifting the right base corner of
the M7i and screwing the foot in or out, refer to Figure 7.
Rotate the Leveler Foot in (counterclockwise, from a topside
view) to drive the foot further into the base.
Rotate the Leveler Foot out (clockwise, from a topside view) to
extend further out of the base.
Set the base corner down and test for stability. The M7i should
sit at without rocking. Adjust and ne-tune the Leveler Foot as
needed.
NOTE: The M7i should not be used until it is level. If the M7i is
transported to a different location, adjust the Leveler Foot as
needed to level your M7i.
TRANSPORT
To transport the M7i, refer to Figure 6 and follow the instructions
below:
Be sure there is a minimum of 36 inches (914 mm) free space for
the machine on all sides before placement.
1. Tilt the M7i to the rear by pushing the Display at the Keiser logo
until the Transport Wheels contact the oor.
2. Steer the M7i by the Display from the rear to the desired location.
3. Hold the top of the Display from the front end, and slowly tilt
the M7i forward to set down.
Figure 6. Transporting the M7i
INCREASE
RESISTANCE
EMERGENCY
BRAKE POSITION
Figure 8. Resistance Lever and
Emergency Brake Position
Figure 7. Leveler Foot Adjustment
Display
Transport
Wheels
REAR FRONT
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Keiser M7i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Keiser M7i in the language / languages: English as an attachment in your email.

The manual is 15,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info