738040

Keiser M7i Manual

18
Zoom out
Zoom in
Previous page
1/20
Next page
M7i WHEELCHAIR-ACCESSIBLE TOTAL BODY TRAINER
18
Weekly
• Check to ensure that the M7i is in safe proper working order:
– M7i is leveled (refer to page 11, “Leveler Foot” section).
– Handles operate properly, (refer to page 12, “Adjustment Knobs” section).
• Check that parts most susceptible to wear are not damaged or broken:
– Handles, Grips, Adjustment Knobs, Recoiler Safety Straps, Footpads, and Foot
Straps.
• Wipe all areas in the sweat path with a dry soft towel or cloth.
Monthly
• Clean external surfaces using warm soapy water and a soft cloth, especially around
the areas that come in contact with sweat.
– Do not use household or industrial cleaners as they can destroy the paint nish.
– For deeper cleaning, use only mild dish washing soap, followed by an automotive
treatment such as Meguiar’s
®
Quik Detailer Mist and Wipe.
Biannually
• Check to ensure all external visible screws and nuts are not loose and that they
are fastened tight.
• Check Handles, Grips, Adjustment Knobs, Recoiler Safety Straps, Footpads, and
Foot Straps and replace if worn.
• The low battery signal (“LO-BA”) will appear on the computer display when it is
time to replace the batteries (two D batteries per M7i, refer to “Computer Battery
Replacement” on page 19 for complete instructions).
NOTE: For establishments with multiple M7i machines, replacement of all computer
batteries at the same time is recommended.
• Apply wax to protect the paint nish on metal parts:
1. Wipe down and thoroughly clean the M7i prior to applying wax.
2. Use an easily applied automotive treatment such as Meguiar’s
®
Quik Detailer Mist
and Wipe.
3. Target areas that come in contact with sweat as they are most vulnerable to rust.
NOTE: Failure to apply a coat of wax to high-sweat areas at least twice annually
will decrease paint and frame life due to corrosion and will void the warranty.
• Apply lubricant to the Adjustment Knobs:
1. Unscrew Adjustment Knobs from the Arm.
2. Clean threads with a lint-free cloth.
3. Apply a moderate amount of lubricant to the threads.
NOTE: Both the threaded stud and the threaded insert nut are stainless steel. It
is critical to keep the threads lubricated with a heavy grease (preferably white or
clear in color), such as HYDROTEX
®
Acculube #2 or any compound with equivalent
anti-wear and corrosion resistant properties.
1st Month
• Check to ensure all external visible screws and nuts are not loose and that they
are fastened tight.
• Check for broken stitches or parts; torn, cut or frayed material; or locks, buckles,
or hook and loop fasteners that do not hold securely.
Contact Keiser Customer Support for replacement part(s) order, or for any matters regarding the safe operation of
your M7i, by telephone at 1 559 256 8000, online 24/7 at keiser.com/support, or by email at service@keiser.com.
CAUTION: Routine maintenance is an essential part of maintaining the highest level of equipment safety, as
well as optimal equipment performance. Immediately replace damaged, worn, or broken parts and do not use
the M7i until all repairs have been completed and tested by a certied Keiser technician.
MAINTENANCE
PREVENTATIVE MAINTENANCE SCHEDULE
… 18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Keiser M7i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Keiser M7i in the language / languages: English as an attachment in your email.

The manual is 15,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info