738040
16
Zoom out
Zoom in
Previous page
1/20
Next page
M7i WHEELCHAIR-ACCESSIBLE TOTAL BODY TRAINER
16
Proper biomechanical positioning is necessary for a safe, comfortable, and effective workout. Follow the steps below to ensure
proper biomechanical positioning before every workout:
1. Wheelchair Position: Feet are directly over the M7i Base Plate.
2. Set Proper Reach:
Legs — Place feet onto the Footpads, then extend one Footpad to the furthest position. Check for a slight bend at the
knee and for minimal contact of your lower thigh with the seat. Adjust wheelchair position as needed.
Hands and Arms — Grab one Handle and extend it to the furthest position. With your back against the wheelchair
backrest, check for a slight elbow bend. Adjust the Handle reach as needed for proper reach and comfort.
3. Lock and Strap: Once proper reach is attained, lock your wheelchair brake (turn off powered mobility devices) and attach
the Recoiler Safety Straps (refer to page 12 “Recoiler Safety Straps” section).
Figure 13 “Biomechanical Positioning” shown below demonstrates proper positioning throughout your workout:
LEGS
At full leg extension, ensure that
your knee keeps a slight bend
and that your lower thigh
makes minimum contact with
the seat. Keep your legs in
line with the Footpads. The
legs should not be bowed
out or inward.
HEAD AND NECK
Keep your head and neck in alignment with your body. Your eyes
and ears should be on the same horizontal plane and parallel
with the oor.
BACK AND SHOULDERS
Your back must be fully supported by your wheelchair backrest
at all times. Adjust any backrest support, cushion, or pillow
for comfort. Avoid sitting at the edge of your seat. Maintain
the natural curves of the spine and avoid leaning forward or
arching your back to achieve proper posture.
HANDS AND ARMS
Ensure a rm grasp throughout the exercise and
that your elbows keep a slight bend at full extension.
Keep your hands in front of your chest. Adjustable
Handles allow users of varied heights to exercise
comfortably. Swivel Handles allow wrists/shoulders
to rotate naturally and freely.
FEET
Place your feet on the Footpads with heels resting against
the Footpad rear wall. Foot Straps provide secure footing
during exercise. NOTE: Ensure Foot Straps are snug to t,
without causing any discomfort.
Figure 13. Biomechanical Positioning
Figure 13 above features optional Leg Stabilizers (PN 520818) and Adaptive Wrist Straps (PN 525408), available for individuals with
limited control of legs or arms. Consult with your physician to determine if these items are right for you.
HOW TO EXERCISE ON THE M7i
BIOMECHANICAL POSITION
The M7i is intended for cardiovascular, strength, and power conditioning exercise. The following sections outline the safe
and proper operation of the M7i.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Keiser M7i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Keiser M7i in the language / languages: English as an attachment in your email.

The manual is 15,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info